Connecting line for oil level check or for oil change at the retarder

W58.50-1010-11

Manufacture a conductor cable according to the picture and according to the instructions from the valve extension A 385 401 00 13 shown below.

1 Release the valve element (1) from the valve extension (2).

2 Remove the two connector beads (3) from the valve extension (2) with a screwdriver.

Do not damage the gasket (joint) (4).

3 Remove the gasket (joint) (4).

4 Remove the two connector beads (3), from valve extension (2).

5 Unload valve extension (2) with compressed air.

6 Install gasket again (4).