W46.80-1075-10
Make adapting cable according to the image.
1 Make three electric cables approx. 40 cm long and three electric cables approx. 30 cm long.
2 In each of the end pieces (FEMALE) for the connector (2) two electrical cables must be used, a long one (approx. 40 cm) and a short one (approx. 30 cm).
3 Crimp the terminals (FEMALE) on the electrical cable pairs and install on the cavity of the connector (2).
4 Crimp on opposite extremities of the long electrical cables the end pieces (MALE) and install in the cavity of connectors (1).
Insert three terminals (MALE) into the connector cavities (1) according to the occupation of the connector cavities (2).
5 Install the three testing banana plugs (3) in the extremities of the short electric cables from the connector (2).
The red banana plug must be crimped on the electric cable from cavity 1.
The green banana plug must be crimped on the electric cable from cavity 2.
The black banana plug must be crimped on the electric cable from cavity 3.
6 Install protection covers on the connectors housing (1 and 2) and isolate the electric cables with insulating tape of corrugated tube.
indications on ordering parts
Part Number | Designation | Quantity |
A 005 545 66 26 | Female connector for electrical terminal (3 ways) | 1 |
A 034 545 39 28 | Male connector for electrical terminal (3 ways) | 1 |
A011 545 77 26 | Electrical terminal (FEMALE) | 3 |
A 035 545 25 28 | Electrical terminal (MALE) | 3 |
A000 546 60 35 | Protection cover (rubber) | 2 |
- | Electric cable Ø 0.75 mm² (commerce available) | Approx. 2.10 m |
- | Red banana plug (commerce available) | 1 |
- | Green banana plug (commerce available) | 1 |
- | Black banana plug (commerce available) | 1 |