Press on sleeve for tapered roller bearing cone on drive pinion

Tipo wf · tema 58.50 · versione 0300 · 2016-02-12

Valido per:

Non disponibile in “it”; mostrato in Inglese.

Collocazione

Gruppo funzionale 0 In generale › 58 Attrezzi › 58.50 Attrezzi da fabbricare in proprio

EinPAS 17 Organi della trasmissione/assale › 17.51 Assale posteriore › 17.51.65 Ingranaggi e differenziale al ponte posteriore/trasmissione passante

Valido anche per motori/cambi: 741 91*, 741 93*, 742 8**, 743 0**, 743 1**, 743 2**, 743 3**, 745 5**, 745 9**, 746 86*, 746 87*, 746 880, 746 888, 746 99*

WF58.50-B-3531-03A

Press on sleeve for tapered roller bearing cone on drive pinion



W26.50-1041-01

Fabricate a polymer sleeve (plastic, nylon etc) as per the drawing.

Utilized to assist in the installation of the pinion at the inside race of the roller bearing.

Measurements:

A 52 mm Ø (+0.05) for axles 745.51/53/88/98/95, 746.87/97/99

A 53.45 mm Ø (+0.05) for axles 741.9, 745.51/53/88/98/95, 746.87/97/99

A 49.4 mm Ø (+0.05) for axles 743.0/1/2/3, 745.54/55, 746.89/98

B 22 mm

Chamfer the corners 4 mm x 30°.