Service Information: Introduction of 2-component epoxy body filler

SI60.00-U-0015A

Service Information: Introduction of 2-component epoxy body filler

26.07.2016

Model

all

A two-component epoxy basic body filler can be ordered via Paragon. Its intended use and properties are below.

Applications

 Repair of surfaced and tinned transitions

 For part replacement when rectifying unevenness

 For part replacement when tinning in seam area

 For part replacement without tinning in seam area (only in combination with adhesive kit A 012 989 17 71)

Properties

 Easy application through static mixer

 Application without primer

 Easy process capability and grinding capability

 Resistant to high pressure, nonshrinking

 Thixotropic set (i.e., the flowability changes to match externally-applied influences)

 Free of solvents, PVC and isocyanates

 Usable up to a maximum coat thickness of 2 mm

 Pot life (processability duration) of 60 to 90 min.

 Both forced hardening (1 h at 60 to 65 °C) as well as air dehumidification possible (8 to 24 hours at interior temperature) Generate PTSS case and add attachments to the case.

Ground

 Bright or zinc galvanized steel

 Aluminum

Parts ordering note

Part no.	Designation	Quantity
A 012 989 17 71	Glue kit	1
A 012 989 29 71	Two-component epoxy basic body filler	1