72 - 1260 Removing and installing sliding door
1
2
3
4
5
6
8
9
7
1 Sliding door
2 Lower guide bracket
3 Allen bolt with washer M8 25 Nm
4 Plug
5 Guide rail end piece
6 Countersunk Allen bolt
7 Guide rail cover
8 Screw with washer M10 40 Nm
9 Upper guide bracket
Removing
1 Pull off plug (4) and unscrew lower guide bracket (2).
2 Remove guide rail end piece (5).
5
3 Support door underneath and unscrew upper guide bracket (9).
4 Raise door, push towards the rear and lift out of central guide rail.
9
Note
To remove the lower guide bracket, first remove the guide rail cover (7). In vehicles with wooden floor, the silicon seal must also be removed to do this.