27- 6280 Removal and installation of 1st gear switch
1 Gearshift handle | |
2 Counternut | |
3 Shift gate | |
4 Plug with cable | |
5 Switch, 1st gear | |
6 Retaining plates | |
7 Phillips screws | |
8 Phillips screws |
Removal
-------------------------------
1 Loosen counternut (2) and screw off gearshift handle (1).
2 Screw out Phillips screws (8).
3 Lift off shift gate (3).
4 Unhook cable grommet (arrow) and remove shift gate (3) together with cable.
5 Screw out Phillips screws (7) and remove retaining plates (6).
6 Screw out switch (5) and disconnect plug (4).
Installation
-------------------------------
1 Connect plug with cable (4) and install switch (5).
2 Install retaining plates (6) with Phillips
screws (7).
3 Pull in cable and install cable grommet (arrow).
4 Fasten shift gate (3) with Phillips head screws (8).
5 Screw on gearshift handle (1) and tighten counternut (2).