0400 - Electrical wiring diagram: Exhaust gas recirculation with auto. trans. CH Model year 1988 Engine 601 in model 201 · ra070160104c2x · Mercedes-Benz WIS

07.1-400 Electrical wiring diagrams

The wiring diagrams up to and including 06/1991 or model year 1992 are dealt with below.

As of 07/1991 and model year 1992 are located to the relevant wiring diagram volume.

Model 124 as of 07/1991 and model year 1992 Volumes 4 and 4.1

Model 124 as of 10/1992

Volumes 1 and 2

Model 201 as of 07/1991 and model year 1992 Volumes 5 and 5.1

Model 202 as of 06/1993 and model year 1994 Volumes 1 and 2

Engine 601  in model 201

Model year 1988

Electrical wiring diagram exhaust gas recirculation with automatic transmission

S26/5	Connector engine cable harness/key lamp 1-pole
S27/6	Microswitch exhaust gas recirculation
W10	Ground, battery
X25	Connector preglow cable harness 4-pole
X35	Terminal block terminal 30/terminal 61
Y27	Change-over valve exhaust gas recirculation
Y28	Change-over valve vacuum control flap
Z	Connector sleeve terminal 15 (soldered connector in harness)
d	Central electrics coupling "W" jack 2
e	Y2 electromagnetic coupling engine fan

A1p7	Electronic clock/tachometer
F1	Central electrics
E	Central electrics jacks 6 and 8
U	Central electrics jack 6
G1	Battery
L3	Speed sensor starter ring gear
L3x	Connector speed sensor starter ring gear
N15	Relay kickdown cut-out
N37/2	Control unit exhaust gas recirculation
S2/2	Glow starter switch
S25/4	Temperature switch 100 °C exhaust gas recirculation
S25/7	Temperature switch 25 °C exhaust gas recirculation

Note

Unidentified grounding points are connected to engine ground or body ground.

0400 - Electrical wiring diagram: Exhaust gas recirculation with auto. trans. CH Model year 1988 Engine 601 in model 201