of4330b300001a

Retarder check, form

Tipo of · tema 43.30 · versione 0100 · 2016-02-12

Valido per:

Non disponibile in “it”; mostrato in Inglese.

Collocazione

Gruppo funzionale 2 Telaio › 43 Freni, complesso pneumatico e freni addizzionali › 43.30 Retarder (idraulico) — Serie 368 · Serie 382 · Serie 384 · Serie 386 · Serie 634 · Serie 688 · Serie 693 · Serie 694 · Serie 695 · Serie 696 · Serie 958 · Serie 979

EinPAS 21 Freni/impianto di depressione/impianto pneumatico › 21.21 Retarder › 21.21.1 Informazione basilare — Serie 368 · Serie 382 · Serie 384 · Serie 386 · Serie 634 · Serie 688 · Serie 693 · Serie 694 · Serie 695 · Serie 696 · Serie 958 · Serie 979

OF43.30-B-3000-01A

Retarder check, form

Buses

12.02.16

1 - General information

Customer

Date

Vehicle

Current mileage

..................................................km

Fleet number

Chassis number

Registration plate

Name of the technician/mechanic

Additional remarks

2 - Basic checks (inspection to be carried out before removing the gearbox / retarder) - On-board diagnosis

Are there retarder related faults?

Yes (......)

No (......)

Comments

Have the faults been identified?

Yes (......)

No (......)

Comments

Have the faults been corrected?

Yes (......)

No (......)

Comments

Additional remarks

WinDia Diagnose (Voith diagnose tool)

Has the version of the retarder's electronic unit been checked?

Yes (......)

No (......)

File name

Has the unit's fault memory been collected?

Yes (......)

No (......)

File name

Additional remarks

3 - Gearbox data

Important: Collect two oil samples ( one for Voith and one for Mercedes-Benz) during the draining of the gearbox (collect the samples during the draining and not after).

Model

Type of lubricant

Number of the item

Current mileage of the lubricant

Serial number

Quantity of lubricant drained

Remove the retarder bearing race from the gearbox case, remove the adjustment shims installed and measure them.

Measurement found: ......................... (mm)

Remark:The bearing race removed from the gearbox must be sent to Voith together with the retarder to be repaired.

Additional remarks

4 - Data of the retarder

Important: Collect two oil samples ( one for Voith and one for Mercedes-Benz) during the draining of the gearbox (collect the samples during the draining and not after).

Model

Type of lubricant

Number of the item

Current mileage of the lubricant

Serial number

Quantity of lubricant drained

Additional remarks

5 - Proportional valve

Has it evident damages?

Yes (......)

No (......)

Comments

Do the connectors present damages?

Yes (......)

No (......)

Comments

Additional remarks

6 - Heat exchanger

Has it evident damages?

Yes (......)

No (......)

Comments

Has it traces of leaks or oil x water mix?

Yes (......)

No (......)

Comments

Has the exchanger's volume been checked?

Yes (......)

No (......)

Volume found: .....................(liters

Needs to be replaced?

Yes (......)

No (......)

Comments

Additional remarks

Convey this filled out form together with the retarder to be inspected. Keep one copy at the Dealer or at the Mercedes-Benz Authorized Workshop.