gf1440b3001a

AdBlue tank, component description

Tipo gf · tema 14.40 · versione 0400 · 2016-02-12

Valido per: Cumbustion engine 924.9 with Vehicle 368, 384.0, 384.2, 979.2 with CODE MS5 (BlueTec 5)Cumbustion engine 926.9 with Vehicle 368, 382.17, 382.18, 384.0 with CODE MS5 (BlueTec 5)

Non disponibile in “it”; mostrato in Inglese.

Collocazione

Gruppo funzionale 1 Motore › 14 Collettore di scarico, freno motore, impianto di depurazione gas di scarico › 14.40 Post-trattamento gas di scarico, AdBlue — Serie 368 · Serie 382 (modelli 17*, 18*) · Serie 384 (modelli 0**, 2**) · Serie 979 (modelli 2**)

EinPAS 15 Motore › 15.40 Impianto di scarico/post-trattamento dei gas di scarico › 15.40.53 Serbatoio/dispositivo di riempimento — Serie 368 · Serie 382 (modelli 17*, 18*) · Serie 384 (modelli 0**, 2**) · Serie 979 (modelli 2**)

Valido anche per motori/cambi: 924 9**, 926 9**

GF14.40-B-3001A

AdBlue tank, component description

12.02.16

Cumbustion engine 924.9 with Vehicle 368, 384.0, 384.2, 979.2 with CODE MS5 (BlueTec 5)

Cumbustion engine 926.9 with Vehicle 368, 382.17, 382.18, 384.0 with CODE MS5 (BlueTec 5)

AdBlue tank, component description

B14.40-0072-06

Represented on vehicle 382.177

Arrangement

3 AdBlue reservoir

The AdBlue reservoir (3) is fastened at the right side chassis frame.

AdBlue tank, component description

B14.40-0140-05

Represented in vehicle 384.223

3 AdBlue reservoir

AdBlue tank, component description

B14.40-0008-06

35 liter AdBlue reservoir

Composition

1 Magnetic adapter on the filler neck

2 Coolant duct

3 AdBlue reservoir

4 Coolant pipe

5 AdBlue pipe (return)

6 Coolant pipe

7 AdBlue pipe (suction)

8 Combined AdBlue level and temperature sensor (17B02)

AdBlue tank, component description

B14.40-0126-05

25 liters AdBlue reservoir

1 Magnetic adapter on the filler neck

2 Coolant duct

3 AdBlue reservoir

4 Coolant pipe

5 AdBlue pipe (return)

6 Coolant pipe

7 AdBlue pipe (suction)

8 Combined AdBlue level and temperature sensor (17B02)

The AdBlue reservoir (3) consists of an aluminum or synthetic material container and has a coolant duct (2), as well as the pipes (4,5,6,7) for the connection of the AdBlue flow and coolant flow.

The filler neck opening of the AdBlue reservoir (3) has a diameter 19 mm smaller than the Diesel filler neck opening and additionally has a magnetic adapter (1).

To control the AdBlue level and temperature, the reservoir contains a combined AdBlue level and temperature sensor (8)

Refilling AdBlue

The filler neck of the reservoir (3) prevents, with its specific diameter and magnetic adapter, an erroneously filling with Diesel fuel.

During the refilling, the magnetic field of the adapter (1) activates a magnetic switch, enabling the filling. Otherwise this system prevents the accidental Diesel fuel filling of the AdBlue reservoir through the magnetic adapter (1) and the magnetic switch in the supply pistol, only permitted when there is a certain magnetic field.

Heating of AdBlue

The coolant proceeding from the engine flows through the coolant pipe (4) inside the reservoir (3). The flow in the coolant duct (2) leaves the AdBlue reservoir (3) by means of the coolant pipe (6) and returns to the engine. By means of the heat transfer in the cooling duct (2), any possibly frozen AdBlue is thawed.