Oil pump |
Number | Designation | Engine 457.9; 460.984 | |||
BE18.10-B-1001-01B | Basic bore diameter of the shafts housings in the pump case and cover | Valid for Z522.006/03 | mm | 22,000...22,021 | |
Valid for Z522.006/06 | mm | 25,000...25,013 | |||
BE18.10-B-1002-01B | Diameter of shafts | mm | 21,93...21,94 | ||
BE18.10-B-1003-01B | Length of shaft | Valid for Z522.006/03 | Actuator | mm | 80,7...81,0 |
Valid for Z522.006/06 | Actuator | mm | 86,7...87,0 | ||
Valid for Z522.006/03 | Actuated | mm | 65,7...66,0 | ||
Valid for Z522.006/06 | Actuated | mm | 71,7...72,0 | ||
BE18.10-B-1004-01B | Gears diameter | Inner | mm | 21,900...21,915 | |
Outer | mm | 21,870...21,885 | |||
BE18.10-B-1005-01B | Height of the pump gears | Valid for Z522.006/03 | Drive/driven | mm | 42,911...42,950 |
Valid for Z522.006/06 | Drive/driven | mm | 48,911...48,950 | ||
BE18.10-B-1006-01B | Housing depth of the gears in the pump casing | Valid for Z522.006/03 | mm | 43,000...43,039 | |
Valid for Z522.006/06 | mm | 49,000...49,039 | |||
BE18.10-B-1007-01B | A = Assembly position of the pump axle actuation gear | mm | 0,5 | ||
BE18.10-B-1008-01B | Minimal charge for assembly of the driving gear to the pump shaft | N | 17.600 | ||
BE18.10-B-1009-01B | B = Mounting position of the pump gears to their shafts | mm | 11,5...11,7 | ||
BE18.10-B-1010-01B | Minimal charge for the assembly of the pump gears to their shafts | N | 15.500 | ||
BE18.10-B-1011-01B | Pressure limiting valve | Length of valve casing | mm | 80,3...80,6 | |
Opening pressure | bar | 5,8...7,2 | |||
BE18.10-B-1012-01B | Play between the gear teeth and the inner wall of the housing (lodging) | mm | 0,030...0,122 | ||
BE18.10-B-1013-01B | End play of the internal gears | mm | 0,050...0,128 | ||
BE18.10-B-1014-01B | Radial play of the axles in the housing lodgings and in the pump cover | mm | 0,060...0,091 | ||
BE18.10-B-1015-01B | Clearance between the pump inner gear teeth | mm | 0,312...0,476 | ||
BE18.10-B-1016-01B | Clearance between teeth of the pump gear and the crankshaft gear | mm | 0,077...0,333 |