Engine | 457.9 in model 382, 634, 685 |
except code MS5 (Euro V) | |
Engine | 457.9 in model 382, 634, 685 |
with code MS5 (Euro V) | |
Engine | 457.9 in model 693 |
except code MS5 (Euro V) | |
Engine | 457.9 in model 693 |
with code MS5 (Euro V) | |
Engine | 457.9 in model 695, 696, 934, 958 |
except code MS5 (BlueTec 5) | |
Engine | 457.9 in model 695, 696, 934.241/251, 958 |
with code MS5 (BlueTec 5) | |
Engine | 457.9 in model 695 |
except code MS5 (BlueTec 5) | |
Engine | 457.9 in model 695 |
with code MS5 (BlueTec 5) | |
Engine | 460.984 in model 934, 938 |
with code MS5 (BlueTec 5) |
Connecting rod test values |
Number | Designation | Engine 457.9 except for Code MS5 | Engine 457.9, 460.984 with Code MS5 | ||
BE03.10-B-1001-01G | Connecting rod cap bolt | Thread diameter | mm | 16x1,5 | 16x1,5 |
Length of new conditions rod | mm | 67,2...67,5 | 67,2...67,5 | ||
Rod admissible length | mm | 68,5 | 68,5 | ||
BE03.10-B-1002-01G | Radial play of the connecting rod bearing | mm | 0,060...0,120 | 0,060...0,120 | |
BE03.10-B-1003-01G | Connecting rod shells (bearings) lodging diameter | mm | 95,000...95,022 | 95,000...95,022 | |
BE03.10-B-1004-01G | Admissible out-of-round of the lodging (basic) of the connecting rod (bearing) shell | mm | 0,008 | 0,008 | |
BE03.10-B-1005-01G | Internal diameter of the bushing mounted on the connecting rod (final finishing) | mm | 52,05...52.07 | 52,05...52.07 | |
BE03.10-B-1006-01G | Wrist pin bushing basic bore diameter in connecting rod | mm | 57,000...57,019 | 57,000...57,019 | |
BE03.10-B-1007-01G | Admissible out of round of the connecting rod bushing lodging | mm | 0,008 | 0,008 | |
BE03.10-B-1008-01G | Axial play of the connecting rod shell (bearing) | mm | 0,130...0,292 | 0,130...0,292 | |
BE03.10-B-1009-01G | Piston pin radial play in the piston | mm | - | - | |
BE03.10-B-1010-01G | Radial play of the piston pin in the connecting rod bushing lodging | mm | - | - | |
BE03.10-B-1011-01G | Connecting rod length (A), from the center of the bearing shell housing to the center of the bushing housing | mm | 250,970...251,03 | 250,970...251,03 | |
BE03.10-B-1012-01G | Maximum permissible parallelism and torsion (B) deviation between the center lines of connecting rod bearing bore and center of wrist pin bore, at distance (C) | deviation B | mm | 0,030 | 0,030 |
Measuring distance | mm | 50 | 50 | ||
BE03.10-B-1013-01G | Connecting rod width in the shell seat | mm | 37,000...37,400 | 37,000...37,300 | |
BE03.10-B-1014-01G | Outside diameter of wrist pin bushing | mm | 57,080...57,100 | 57,080...57,100 | |
BE03.10-B-1015-01G | Interference between the bushing and the housing in the connecting rod | mm | 0,050...0,100 | 0,050...0,100 |