D72.20-1229-08
Shown on right rear-end door
1.1 Bottom section paneling
1.2 Paneling upper section
4 Screw
2 Cap
3 Screwdriver
| Remove/install | ||
| Notes on carrying out repair work in the vehicle interior | ||
1 | Remove cover from inside door opener | Only on right rear-end door. | |
Cover cannot be removed without damage. For this reason the cover should always be replaced after removal. | |||
Long wedge | |||
2 | Unclip paneling bottom section (1.1) and remove | To remove paneling top section (1.2) first remove paneling bottom section (1.1) | |
Installation: Check clips for damage, replace if necessary. | |||
Clip remover | |||
Long wedge | |||
3 | Unclip caps (2) from paneling top section (1.2) with suitable screwdriver (3) | Unclip caps (2) at top as shown with screwdriver (3) and pivot downward | |
Installation: Observe installation position. | |||
4 | Remove screws/bolts (4) | ||
5 | Unclip paneling top section (1.2) and remove | Installation: Check clips for damage, replace if necessary. | |
Long wedge | |||
Clip remover | |||
6 | Install in the reverse order |
452 589 01 63 00
Clip remover
Long wedge
115 589 03 59 00
Documenti citati
- ah6800n000101s Avvertenza per l'esecuzione dei lavori di riparazione nell'abitacolo