P68.30-3546-08
Shown on vehicle with code (I52) Head airbag, left side of vehicle
1 Side roof frame paneling
2 Screw
5 Bolts
6 Edge guard
7 Edge guard
3 AIRBAG cover (with code (I52) Head airbag)
4 Bolt (with code (I52) Head airbag)
P68.30-3547-07
Shown on vehicle with code (I52) Head airbag, left side of vehicle
1 Side roof frame paneling
3 AIRBAG cover (with code (I52) Head airbag)
10 Bracket
8 Clips (with code (I52) Head airbag)
9 Bracket
| Remove/install | ||
1 | Remove rear roof frame trim | ||
2 | Unscrew bolts (5) from side roof frame paneling (1) | On vehicles without code (I52) Head airbag, only one bolt (5) is installed. | |
3 | Loosen edge guard (6) in rear area of side roof frame paneling (1) | ||
4 | Unhook bracket (9) from recesses (arrows B) | Installation: Position edge guard (6) on side roof frame paneling (1). | |
5 | Remove front roof frame paneling | ||
6 | Unscrew bolt (2) from side roof frame paneling (1) | ||
7 | Loosen edge guard (7) in area of side roof frame paneling (1) | ||
8 | Unclip side roof paneling (1) | On vehicles without code (I52) Head airbag | |
9 | Unclip AIRBAG cover (3) | On vehicles with code (I52) Head airbag | |
10 | Unscrew bolt (4) | On vehicles with code (I52) Head airbag | |
11 | Pivot out side roof frame paneling (1) until clips (8) can be detached | On vehicles with code (I52) Head airbag | |
12 | Detach clips (8) with clip remover | On vehicles with code (I52) Head airbag | |
Clip remover | |||
13 | Unhook brackets (10) for cutout (arrows A) | ||
14 | Remove side roof frame paneling (1) | ||
15 | Install in the reverse order |
Snap-release tool
452 589 01 63 00
Documenti citati
- ar6830p4450mcu
- ar6830p4470mcc Smontare e montare il rivestimento posteriore del telaio del tetto