ar4920b3001evi

Perform teach-in processes on exhaust gas aftertreatment control unit (ACM)

Tipo ar · tema 49.20 · versione 0100 · 2018-09-04

Valido per: Engine 936.9 in model 382.155/189 with code MS6 (Euro VI)

Non disponibile in “it”; mostrato in Inglese.

Collocazione

Gruppo funzionale 1 Motore › 49 Impianto di scarico, depurazione dei gas di scarico › 49.20 Post-trattamento dei gas di scarico — Serie 382 (modelli 155, 189) · Serie 936 (modelli 9**)

EinPAS 15 Motore › 15.40 Impianto di scarico/post-trattamento dei gas di scarico › 15.40.11 Centralina di comando/relè — Serie 382 (modelli 155, 189) · Serie 936 (modelli 9**)

AR49.20-B-3001EVI

Perform teach-in processes on exhaust gas aftertreatment control unit (ACM)

20.08.2018

Engine

936.9 in model 382.155/189

with code MS6 (Euro VI)

Program

1

Turn on the ignition

2

Connect the diagnosis system and start the XENTRY


If one of the following components is replaced, the exhaust gas after-treatment control unit (ACM) must be run in different procedures of re-programming:
Exhaust gas after-treatment unit
Diesel particulate filter (DPF)

3

From the list, select and start the corresponding re-programming procedure


The re-programming procedures are fully performed by the menu:
Exhaust gas after-treatment control unit (ACM)
Adaptation
Re-programming procedure
Re-programming of new components

4

Finish the XENTRY and disconnect the diagnosis system