ar4920b2040evi

Remove/install intake filter of pump module

Tipo ar · tema 49.20 · versione 0100 · 2019-04-10

Valido per: Engine 936.9 in model 382.155/189 with code MS6 (Euro VI)

Non disponibile in “it”; mostrato in Inglese.

Collocazione

Gruppo funzionale 1 Motore › 49 Impianto di scarico, depurazione dei gas di scarico › 49.20 Post-trattamento dei gas di scarico — Serie 382 (modelli 155, 189) · Serie 936 (modelli 9**)

EinPAS 15 Motore › 15.40 Impianto di scarico/post-trattamento dei gas di scarico › 15.40.51 Pompa/dosatore/ugello — Serie 382 (modelli 155, 189) · Serie 936 (modelli 9**)

AR49.20-B-2040EVI

Remove/install intake filter of pump module

26.03.2019

Engine	936.9 in model 382.155/189
	with code MS6 (Euro VI)

Remove/install intake filter of pump module

1	Pump module
2	Support
3	AdBlue® pressure piping
4	AdBlue® suction piping
5	AdBlue® inlet
6	Filter
7	AdBlue® inlet nipple

B49.20-A011-05

 	Remove/install
1	Detach the AdBlue® pressure piping (3) on the pump module (1) and tie up it pointing upward	 Collect and discard the AdBlue® drained.
2	Detach the AdBlue® suction piping (4) on the pump module (1) and tie up it pointing upward	 Collect the AdBlue® that flows out.
3	Remove the AdBlue® inlet nipple (7) from the pump module (1)	 Small amounts of AdBlue® can flow out.
		 AdBlue® intake fitting in the pump module	*BA49.20-B-1019-02EVI
4	Remove the filter (6) from the AdBlue® inlet (5)	 Installation: Insert the filter (6) carefully in the AdBlue® inlet (5) until seating the filter flange (6) in a perceptible way.
		 Use a screw M5 to pull the filter (6) outward.
5	Installation in reverse order

 Exhaust gas aftertreatment, BlueTec(R)

Number	Designation		Engine 936.9 in the Type 382.155/189 with Code MS6 (Euro VI)
BA49.20-B-1019-02EVI	AdBlue® intake fitting in the pump module	Nm	14