ar4620b3222a

Replace adjustment screws of steering gear housing

Tipo ar · tema 46.20 · versione 0101 · 2020-03-31

Valido per: Steering gear 766.4 in model 368, 382, 384, 390, 634, 685, 688 Steering gear 766.4 in model 384, 386, 682, 693, 694, 695 Steering gear 766.4 in model 386, 388, 390, 685, 695, 958 Steering gear 766.4 in model 688, 958, 979 Steering gear 766.5

Non disponibile in “it”; mostrato in Inglese.

Collocazione

Gruppo funzionale 2 Telaio › 46 Sterzo › 46.20 Scatola comando sterzo — Serie 368 · Serie 382 · Serie 384 · Serie 386 · Serie 388 · Serie 390 · Serie 634 · Serie 682 · Serie 685 · Serie 688 · Serie 693 · Serie 694 · Serie 695 · Serie 958 · Serie 979

EinPAS 22 Sterzo › 22.15 Servosterzo › 22.15.42 Ingranaggi dello sterzo/albero dello sterzo — Serie 368 · Serie 382 · Serie 384 · Serie 386 · Serie 388 · Serie 390 · Serie 634 · Serie 682 · Serie 685 · Serie 688 · Serie 693 · Serie 694 · Serie 695 · Serie 958 · Serie 979

Valido anche per motori/cambi: 766 4**, 766 5**

AR46.20-B-3222A

Replace adjustment screws of steering gear housing

11.03.2020

Steering gear

766.4 in model 368, 382, 384, 390, 634, 685, 688

Steering gear

766.4 in model 384, 386, 682, 693, 694, 695

Steering gear

766.4 in model 386, 388, 390, 685, 695, 958

Steering gear

766.4 in model 688, 958, 979

Steering gear

766.5

Replace adjustment screws of steering gear housing
Replace adjustment screws of steering gear housing

Represented on a bus

1

Adjustment screw

B46.20-0020-01

B46.20-0061-01

Check

1

Remove the adjustment screws (1)

General information on wheel alignment
.

AR40.20-B-0201C

General information on wheel alignment.

AR40.20-B-0201B

Checking and adjusting pressure reduction valves.

AR46.20-B-3220C

The vehicle wheels must be aligned.

The vehicle wheels are to be aligned and supported on turning plates.

2

Assemble new adjustment screws (1)

If hydraulic fluid runs-off, add fluid to the reservoir.

.Limiter valve adjustment bolt

*BA46.20-B-1006-01C

Warning

Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running.

Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts.

AS00.00-Z-0005-01A

3

Start the engine and let it idle

4

Fully turn the steering wheel to the left turning the wheels to the left against the mechanical stop

5

Fully turn the steering wheel to the right turning the wheels to the right against the mechanical stop

The stroke limiting valves adjust themselves automatically to the vehicle's steering geometry conditions. The opening of the valves will occur approximately at 1 degree before the steering stop.

Steering gear

Number

Designation

Steering gear 766.495 in model 958.2/4

Steering gear 766.481/482/489/582

BA46.20-B-1006-01C

Limiter valve adjustment bolt

Nm

15...18

15...18

Steering gear

Number

Designation

Steering gear 766.462/463/465/468/499/563/585

Steering gear 766.464/472/473/477/479/496/498/511/56/581/583/584/586

BA46.20-B-1006-01C

Limiter valve adjustment bolt

Nm

15...18

15...18

Steering gear

Number

Designation

Steering gear 766.483/485/486/497/587

BA46.20-B-1006-01C

Limiter valve adjustment bolt

Nm

15...18

Documenti citati