1 | Manometer |
2 | Regenerative reservoir |
3 | Connection |
B42.10-0428-01
| Check | ||
1 | Remove the piping from the compressed air regenerative reservoir (2) and place the connection (3) to allow installation of the manometer (1) | ||
2 | Connect the manometer (1) to the regenerative tank (2) | Test kit | |
3 | Pressurize the compressed-air system until the pressure regulator's discharge occur | After discharge through the pressure regulator, observe the manometer (1) and check whether the regenerative reservoir has completely emptied. | |
If the regenerative reservoir (2) does not completely empty, causing air pressure inside, check for damage to the piping between the regenerative reservoir and the air drier. | |||
.Pressure regulator | |||
4 | Repeat the operation check | If pressure remains in the regenerative reservoir, replace the air dryer filter. | |
5 | Remove the manometer (1) and the connection | ||
6 | Install the pressure regulator piping to the regenerative reservoir (2) |
Pneumatic brake system |
Number | Designation | Chassis 368.00/05/10/11/15; 382.07/08/11/12/15/17/18; 384.06/07/11/14/20/22/31/33; 634.001/011/012/014/061/071/081; 693.02/10/12/14/15/17/18/19/34/38; 694.00/02/04; 695.01/02/03/04/05; 695.30; 696.08/09; 696.36 | Chassis 364, 384.08/09, 386, 388, 397, 660, 664, 682, 688 | ||
BE42.60-B-1001-01A | Pressure regulator | Opening pressure - Wabco/Knorr | bar | 9,8 ... 10,2 | 7,9 ... 8,3 |
Closing pressure - Wabco/Knorr | bar | 8,7 ... 9,3 | 6,9 ... 7,7 | ||
Service pressure - Wabco/Knorr | bar | 13 | 12 | ||
Opening pressure of safety valve - Wabco/Knorr | bar | 14,5 ... 17,0 | 12,0 ... 15,0 | ||
Tires filling safety valve opening pressure - Wabco | bar | - | 9,0 ... 13,0 | ||
Admissible leakage - Wabco/Knorr | bar (menor ou igual cm3) | 10 | 10 | ||
Pressure on the test stand feeding circuit - Wabco/Knorr | bar | 15 | 10 | ||
Pressure applied to the port 1 for leak test - Wabco/Knorr | bar | 10 | 7 | ||
Pressure applied on the port 21 for leak test - Wabco/Knorr | bar | 10 | 7 |
Pneumatic brake system |
Number | Designation | Chassis 979.046 | ||
BE42.60-B-1001-01A | Pressure regulator | Opening pressure - Wabco/Knorr | bar | 7,9 ... 8,3 |
Closing pressure - Wabco/Knorr | bar | 6,9 ... 7,8 | ||
Service pressure - Wabco/Knorr | bar | 13 | ||
Opening pressure of safety valve - Wabco/Knorr | bar | 14,5 ... 17 | ||
Tires filling safety valve opening pressure - Wabco | bar | - | ||
Admissible leakage - Wabco/Knorr | bar (menor ou igual cm3) | 10 | ||
Pressure on the test stand feeding circuit - Wabco/Knorr | bar | 15 | ||
Pressure applied to the port 1 for leak test - Wabco/Knorr | bar | 10 | ||
Pressure applied on the port 21 for leak test - Wabco/Knorr | bar | 10 |
360 589 00 21 00
Test kit