ar4220b0525a
Remove/install rear brake control cable
Tipo ar · tema 42.20 · versione 0103 · 2020-08-14
Valido per: Model 688 with engine 374.905/950/980/984/988/991/996 Model 688 with engine 374.907/950/980/984/988/989/991/996
Non disponibile in “it”; mostrato in Inglese.
Collocazione
Gruppo funzionale 2 Telaio › 42 Freni impianto idraulico e meccanico › 42.20 Freno di stazionamento — Serie 374 (modelli 905, 907, 950, 980, 984, 988, 989, 991, 996) · Serie 688
EinPAS 21 Freni/impianto di depressione/impianto pneumatico › 21.16 Freno di stazionamento › 21.16.32 Leva del freno/tirante del freno/rinvio/pedale del freno — Serie 374 (modelli 905, 907, 950, 980, 984, 988, 989, 991, 996) · Serie 688
AR42.20-B-0525A
| Remove/install rear brake control cable
| 04.08.2020
|
Model
| 688 with engine 374.905/950/980/984/988/991/996
|
Model
| 688 with engine 374.907/950/980/984/988/989/991/996
|
1
| Cover
|
| 6
| Tension cable
|
2
| Clamping nuts
|
| 7
| Lever
|
3
| Clamp
|
| 8
| Screws
|
4
| Connecting pieces
|
| 9
| Brakes support plate
|
5
| Retaining clips
|
|
|
|
| Remove/install
|
|
|
1
| Remove parking brake lever cover lining (1)
| Using a screwdriver, tighten the lock through the opening on the lining.
|
|
2
| Loosen the two tensioning nuts (2) of the traction cables (6)
|
|
|
3
| Loosen the clamp on the bottom of the vehicle (3)
|
|
|
4
| Release the clamps (3) from the connecting pieces (4)
|
|
|
5
| Separate the tension cables (6) on the connecting pieces (4)
| Remove the retaining clamps (5) and unhook the tension cables (6).
|
|
6
| Remove the brake shoes
|
.
| AR42.10-B-1020D
|
|
|
| Lubricate all contact points of the brake shoes mechanism with long-duration sliding grease.
|
|
|
|
| Molykote paste HTP special lubricating grease
| *BR00.45-Z-1028-06A
|
7
| Unhook the lever (7) from the tension cable (6)
|
|
|
8
| Loosen the screws (8) and remove the traction cable (6) from the brake support plate (9)
| Tighten the bolts (8).
|
|
|
|
| Bolt that fastens the traction cable to the brake supports plate
| *BA42.20-B-1005-01A
|
9
| Install in the reverse order of the steps
|
|
|
Number
| Designation
|
| Type 688.1
|
BA42.20-B-1005-01A
| Bolt that fastens the traction cable to the brake supports plate
| Nm
| 20...25
|
Number
| Designation
| Order number
|
BR00.45-Z-1028-06A
| Molykote paste HTP special lubricating grease
| Use corresponding commercially available repair materials.
|
Documenti citati
