ar4210d0301b

Removing and installing brake fluid reservoir

Tipo ar · tema 42.10 · versione 0103 · 2003-09-12

Valido per: MODELS WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD4, XD5, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7 MODELS 903.61 /66 /67, 904.61 /66 with CODE (ZU7) National version for Canada MODELS 903.61 /66 /67, 904.61 /66 with CODE (ZU8) National version for USA MODEL 903.61 /62 /66 /67, 904.61 /62 /66 with CODE (ZU9) National version for Mexico

Non disponibile in “it”; mostrato in Inglese.

Collocazione

Gruppo funzionale 2 Telaio › 42 Freni impianto idraulico e meccanico › 42.10 Freno di servizio — Serie 903 (modelli 61*, 62*, 66*, 67*) · Serie 904 (modelli 61*, 62*, 66*)

EinPAS 21 Freni/impianto di depressione/impianto pneumatico › 21.15 Freno di servizio/impianto di depressione › 21.15.30 Cilindro maestro del freno/serbatoio/servofreno — Serie 903 (modelli 61*, 62*, 66*, 67*) · Serie 904 (modelli 61*, 62*, 66*)

AR42.10-D-0301B

Removing and installing brake fluid reservoir

29.1.01

MODELS WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD4, XD5, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7

MODELS 903.61 /66 /67, 904.61 /66 with CODE (ZU7) National version for Canada

MODELS 903.61 /66 /67, 904.61 /66 with CODE (ZU8) National version for USA

MODEL 903.61 /62 /66 /67, 904.61 /62 /66 with CODE (ZU9) National version for Mexico

Removing and installing brake fluid reservoir

D42.10-1110-06

1 Reservoir

2 Cap

3 Brake fluid level indicator connector

4 Master brake cylinder

Remove/install

Danger!

Risk of poisoning from swallowing brake fluid. Risk of injury from skin and eye contact with brake fluid.

Pour brake fluid only into suitable and appropriately marked containers. Wear protective clothing and eye protection when handling brake fluid.

AS42.50-Z-0001-01A

Notes on brake fluid

All models

AH42.50-P-0001-01A

Notes on repairs to brake system

All models

AH42.00-P-0003-01A

1

Suction off brake fluid from the storage reservoir (1)

2

Brake fluid indicator

Disconnect electrical connector

3

Remove reservoir

Bend catches (arrows) up and pull off reservoir; if re-used, clean reservoir with methylated spirits.

Seal connection bores on master brake cylinder with plugs. Replace plugs
for reservoir (2).

5

Bleed brake system

AR42.10-D-0010B

6

Adjust fluid in reservoir to correct level

AP42.50-D-4210B

Check brake system for leaks

Documenti citati