AR42.10-D-0015D | Checking braking system for leaks using pressure gauge | 26.1.01 |
MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD4, XD5, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7 with CODE (J61) Test connection hydraulic brake
MODEL 903.61 /66 /67, 904.61 /66
with CODE (J61) Test connection hydraulic brake
with CODE (ZU7) National version for Canada
MODEL 903.61 /66 /67, 904.61 /66
with CODE (J61) Test connection hydraulic brake
with CODE (ZU8) National version for USA
MODEL 903.61 /62 /66 /67, 904.61 /62 /66
with CODE (J61) Test connection hydraulic brake
with CODE (ZU9) National version for Mexico
D42.10-0004-05
1 Test connection for uncontrolled brake pressure
2 Front axle brake caliper
3 ALB controller
4 Test connection, brake pressure controlled
5 Rear axle brake caliper
Fig. item, etc. | Notes on the work | ||
Danger! | Risk of accident. Accidents may result if the vehicle starts off unintentionally with the engine running. Risk of injury. Crushing and burn injuries may result while working on engine during when it is being started or when it is in operation. | Secure vehicle to prevent it from moving. | |
Danger! | Risk of poisoning from swallowing brake fluid. Risk of injury from skin and eye contact with brake fluid. | Pour brake fluid only into suitable and appropriately marked containers. Wear protective clothing and eye protection when handling brake fluid. | |
| Notes on brake fluid | All models | |
| Notes on repairs to brake system | All models | |
| Notes on checking brake system for leaks | ||
| Connect test line to master brake cylinder | ||
Pressure tester | |||
| Perform low-pressure and high-pressure check on brake system | ||
| |||
Test values for low-pressure check | |||
Test values for high-pressure check | |||
| Check fluid level in reservoir and correct if necessary |
Test values for brake system hydraulics
Number | Designation | Models | Models | ||
BE42.50-N-1001-01A | Low-pressure check on brake system | Test pressure | bar | 2...5 | 2...5 |
Duration of test | min | 5 | 5 | ||
Max. pressure drop | % | - | - | ||
BE42.50-N-1002-01A | High-pressure check on brake system | Test pressure | bar | 50...100 | 50...100 |
Duration of test | min | 10 | 10 | ||
Max. pressure drop | % | 10 | 10 | ||
000 589 18 31 00
Brake pedal winch
Commercially available tools
Documenti citati
- ah4200p000301a Avvertenze per i lavori di riparazione dell'impianto frenante
- ah4210n000101a Avvertenze per il controllo della tenuta dell'impianto freni
- ah4250p000101a Avvertenze sul liquido per i freni
- ap4250d4210b Impianto freni idraulici - controllare, correggere il livello del liquido
- ar4210d001502a Effettuare il controllo della bassa e dell'alta pressione dell'impianto freni
- ar4210d001503a Collegare la tubazione di test al cilindro maestro freni
- as0000z000501a Pericolo di infortunio per l'avviamento fortuito del veicolo con motore in funzione. Pericolo d'infortuni a causa di schiacciamenti o ustioni in caso di interventi durante l'avviamento o il motore acceso
- as4250z000101a Pericolo di avvelenamento in caso di ingestione di liquido freni Pericolo di lesioni in caso di contatto della cute e degli occhi con il liquido freni