Rear axle ARS 19/23 |
1 | Brake pads |
A | Brake pad thickness |
B | Brake pad minimum thickness |
B42.10-0020-12
| Check | ||
1 | Remove the wheels | Remove/install wheels | |
2 | Remove the brake drums | Remove/install brake drum | |
3 | Check if the brake drums present any cracks, scoring or wear | ||
4 | Measure the diameter of the brake drums | Skim brake drum | |
If necessary, rectify them using a higher measure | |||
Observe the recommended wear limit For the adjustment values, refer to the | |||
5 | Check the brake pads (1) thickness | Remove/install brake linings | |
Observe the minimum admissible thickness of the linings, and, if necessary, replace them | |||
The brake pad thickness can also be observed without dismantling the drum, through the sight holes on the protection plates. For the adjustment values, refer to the Freightliner Company | |||
6 | Assemble in the reverse order |