1 | Protection plates |
2 | Internal return spring |
3 | External return spring |
4 | Secondary brake shoe |
5 | Pins |
6 | Lock |
7 | Screw |
8 | Sealing rings |
9 | Primary brake shoe |
10 | Screw |
B42.10-0394-05
| Remove | ||
1 | Remove the wheels |
| |
2 | Remove the brake drums |
| |
Vehicle 382.154 | |||
3 | Remove the protective plates (1) | ||
4 | Unlock and release the screw (7) and remove the lock plate (6) | ||
5 | Remove the pins(5) |
| |
6 | Remove primary (9) and secondary (4) brake shoes from holder with internal (2) and external (3) return springs | ||
7 | Remove O-rings (8) | ||
8 | Check secondary (4) and primary (9) brake shoes |
| |
Replace the worn parts. | |||
| Install | ||
9 | Set the drive shaft of shoes to position "zero" | ||
10 | Mount to shoes (4) and (9) new seal rings (8) | Fill with long service life grease the space behind the sealing ring and the bushing groove. | |
Molybdenum disulfide running-in paste | |||
11 | Install the primary brake shoe (9) in the assembly position and insert pin (5) | ||
12 | Install the internal return spring (2) and mount the secondary brake shoe (4) by placing the pin (5) | ||
13 | Install the external return spring (3) | Brake spring plier with approximately 360 mm (14") length. | |
14 | Align the pin grooves (5) of secondary and primary brake shoes (4) and (9) and place the lock plate (6) |
| |
Installation: Install screw (7). | |||
Plate fastening - shoe pin's lock | |||
15 | Install protective plates (1) | Installation: Install screw (10). | |
Fastening of the protective plate | |||
16 | Install the brake drums |
| |
Vehicle 382.154 | |||
17 | Install the wheels |
|