Remove/install diaphragm cylinder

AR42.10-B-0800TE

12.02.16

Vehicle 958.0, 958.1 with CODE BB6 (Drum brakes on front and rear axle)

W42.10-1032-12

Represented in the front axle 731.720

1 Brake line

2 Cotter pin

3 Washer

4 Pin

5 Nut

6 Single-circuit membrane brake cylinder

	Remove and install
1	Empty the compressed air system
2	Remove the brake line (1) on the single-circuit membrane brake cylinder (6)	With the compressed air-based connection system "VOSS 230".	AR42.10-B-0900TA
		With the compressed air-based connection system "VOSS 232" (NG 8, NG-12) or "SCHÄFER SDF" (NG 6).	AR42.10-B-0900TC
	Tips on compressed air-based connection systems		AH00.18-B-0001-01A
3	Remove the pin (4)	 Install: use a new cotter pin (2).
4	Remove the single-circuit membrane brake cylinder (6)	 Install: use new self-locking nuts (5).
			*000589260100
			*001589442100
			*BA42.10-B-1004-08E
	Tips on self-locking nuts and bolts		AH00.00-B-0001-01A
5	Install in reverse order

Brake cylinder

Número	Denominação			Chassis 958.0/2/4 with drum brake


BA42.10-B-1004-08E	Diaphragm cylinder nut on thrust support	M16x1.5	Nm	180

000 589 26 01 00

Wrench

001 589 44 21 00

Torque wrench handle