Repair brake caliper guide

AR42.10-B-0400B

12.02.16

Vehicle 688 with Cumbustion engine 374.977, 904.908, 904.924, 904.957, 904.918, 904.919

B42.10-0314-05

1 Brake caliper

2 Guide pin sleeves

3 Fanfold guard of the guide pin

4 Screw with inside hex (short)

5 Flanged hex head screw (long)

6 Fanfold guard of the set screw

7 Short plug

8 Long plug

9 Sealant for the adjustment mechanism hex

10 Guide pins

	Repair
1	Remove the brake caliper		AR42.10-B-0090B
2	Extract the guide pins (10)
3	Remove the fanfold guard (3)
4	Check for corrosion on the set screw		AR42.10-B-0200-02B
5	Replace the fanfold guard (6) of the set screw		AR42.10-B-0200B
6	Replace the sealant of the adjustment mechanism hex (9)	Install with the aid of an appropriate mandrel.
		 Mandrel	*055589431500
7	Remove the guide pin sleeves (2) from the brake caliper (1)		AR42.10-B-0400-01B
		Replace all sleeves, even if only one shows the maximum allowable wear.	*BE42.10-B-1001-03A
			*BE42.10-B-1001-14A
		Mandrel to remove and install the guide pins sleeve.	*055589421500
8	Install the guide pins sleeve (2) on the brake caliper (1)	Install the inner sleeve with the aid of a mandrel and its adapter.	AR42.10-B-0400-02B
		Distance from the inner sleeve of the guide pin to the surface of the brake caliper.	*BE42.10-B-1002-03A
			*BE42.10-B-1002-14A
		Distance from the outer sleeve of the guide pin to the surface of the brake caliper.	*BE42.10-B-1003-03A
			*BE42.10-B-1003-14A
		Mandrel to remove and install the guide pins sleeve.	*055589421500
9	Install the fanfold guard (3)	Make sure that fanfold guards are evenly seated and show no bending on the slots of the brake caliper channels.	AR42.10-B-0400-03B
10	Lubricate the sliding surfaces of the guide pins (10) and install them by fitting the fanfold guards onto their channels	The longest guide pin is located at the bottom (inlet side of the brake), and the shorter pin is located at the top (outlet side of the brake).
		Lubricate, making sure that the end is free from grease.	*BR00.45-B-1015-06A
11	Install the brake caliper (1)		AR42.10-B-0090B
12	Install the holder with the brake caliper		AR42.10-B-0600B

Test values for front axle floating caliper

Número	Denominação			Front axle 733.880


BE42.10-B-1001-03A	Inner diameter of the guide pins bushings	Maximum	mm	30,185
BE42.10-B-1002-03A	Distance of inner bushing of guide pin to caliper surface		mm	32.9 ... 34.1
BE42.10-B-1003-03A	Distance of outer bushing of guide pin to caliper surface		mm	10.4 ... 11.6

Inspection data for rear brake floating calipers

Número	Denominação			Axle 743.498


BE42.10-B-1001-14A	Inner diameter of the guide pins bushings	Maximum	mm	30,185
BE42.10-B-1002-14A	Distance of inner bushing of guide pin to caliper surface		mm	32,9...34,1
BE42.10-B-1003-14A	Distance of outer bushing of guide pin to caliper surface		mm	10,4...11,6

055 589 42 15 00

Mandrel

055 589 43 15 00

Mandrel

Produtos para reparos

Número	Denominação	Número de pedido
BR00.45-B-1015-06A	Grease	Darina R2 - Shell

Documenti citati