ar3540b0700a

Mechanically locking differential lock

Tipo ar · tema 35.40 · versione 0100 · 2016-02-12

Valido per: Rear axle 740.6, 740.8, 741.7, 741.9, 745.525, 746.890Rear axle 746.2 with Vehicle 958

Non disponibile in “it”; mostrato in Inglese.

Collocazione

Gruppo funzionale 2 Telaio › 35 Asse posteriore › 35.40 Bloccaggi differenziale — Serie 958

EinPAS 17 Organi della trasmissione/assale › 17.51 Assale posteriore › 17.51.65 Ingranaggi e differenziale al ponte posteriore/trasmissione passante — Serie 958

Valido anche per motori/cambi: 740 6**, 740 8**, 741 7**, 741 9**, 745 525, 746 2**, 746 890

AR35.40-B-0700A

Mechanically locking differential lock

12.02.16

Rear axle 740.6, 740.8, 741.7, 741.9, 745.525, 746.890

Rear axle 746.2 with Vehicle 958

Mechanically locking differential lock
Mechanically locking differential lock

B35.40-0002-01

B35.40-0004-01

1 Sealing ring

2 Electrical switch

3 Connector

4 Locking bolt

Lock

1

Disconnect the engine (3) and remove the electrical switch (2) and the sealing ring (1)

Install: Use a new sealing ring.

2

Install the bolt (4) in the blocking command cylinder and screw the bolt until it engages the block

Check the blocking application by turning the wheel hub. When the blocking engages, the wheel hub is locked.

Provide a bolt (4) having as reference the switch thread (2).

3

Unlock the differential blocking in the inverse order