ar3530b047501xd

Determining installed dimension of differential assembly

Tipo ar · tema 35.30 · versione 0100 · 2016-09-15

Valido per: Rear axle 748.590/594 in model 934.2, 958.4

Non disponibile in “it”; mostrato in Inglese.

Collocazione

Gruppo funzionale 2 Telaio › 35 Asse posteriore › 35.30 Trasmissione, comando — Serie 934 (modelli 2**) · Serie 958 (modelli 4**)

EinPAS 17 Organi della trasmissione/assale › 17.51 Assale posteriore › 17.51.65 Ingranaggi e differenziale al ponte posteriore/trasmissione passante — Serie 934 (modelli 2**) · Serie 958 (modelli 4**)

Valido anche per motori/cambi: 748 590, 748 594

AR35.30-B-0475-01XD

Determining installed dimension of differential assembly

Rear axle

748.590/594 in model 934.2, 958.4

Determining installed dimension of differential assembly
Determining installed dimension of differential assembly
Determining installed dimension of differential assembly

001 589 53 21 00

Dial gage

055 589 29 21 00

Adjusting device

055 589 02 23 00

Template

Determining installed dimension of differential assembly

1

Install the gauger (3) on the adjusting device (2).


Observe the proper seating of the gauger (3) in the supports (4) of the adjusting device (2).



2

Install the dial indicators (1) on the adjusting device (2) and support the rod dial indicator on the surface of the gauger (3), applying a load of about 2 mm in the pointer (6). Reset the pointer (5) of the dial indicators (1).


B35.31-0076-11