Determining installed dimension of differential assembly

Tipo ar · tema 35.30 · versione 0203 · 2019-04-19

Valido per: Rear axle 741.7 in model 958 Rear axle 746.209/233 in model 934.2, 938.1, 958 Rear axle 746.213/230 in model 934.2 Rear axle 746.213/230 in model 958.2/4 except code ZC8 (New Final Drive-Top Performance Light) Rear axle 746.218/225 in model 382.1, 634.0

Non disponibile in “it”; mostrato in Inglese.

Collocazione

Gruppo funzionale 2 Telaio › 35 Asse posteriore › 35.30 Trasmissione, comando — Serie 382 (modelli 1**) · Serie 634 (modelli 0**) · Serie 934 (modelli 2**) · Serie 938 (modelli 1**) · Serie 958

EinPAS 17 Organi della trasmissione/assale › 17.51 Assale posteriore › 17.51.65 Ingranaggi e differenziale al ponte posteriore/trasmissione passante — Serie 382 (modelli 1**) · Serie 634 (modelli 0**) · Serie 934 (modelli 2**) · Serie 938 (modelli 1**) · Serie 958

Valido anche per motori/cambi: 741 7**, 746 209, 746 213, 746 218, 746 225, 746 230, 746 233

AR35.30-B-0475-01GA

Determining installed dimension of differential assembly

Rear axle	741.7 in model 958
Rear axle	746.209/233 in model 934.2, 938.1, 958
Rear axle	746.213/230 in model 934.2
Rear axle	746.213/230 in model 958.2/4
	except code ZC8 (New Final Drive-Top Performance Light)
Rear axle	746.218/225 in model 382.1, 634.0

055 589 33 21 00

Template

741 589 00 21 00

Measuring device

001 589 53 21 00

Dial gage

1	Install the  gauger (12) on the  measurement device (11).

 Observe the correct setting of the  measurement device (11) in the supports (15) on the surface of the  gauger (12).

2	Install the  dial indicators (10) in the support brackets (15), support their tips on the surface of the  gauger (12) and reset the pointer (13) of the  dial indicators (10).

 Leave a preload of approximately 2 mm on the pointer (14).

B35.31-0001-11