ar3530b039503b

Check, adjust gear backlash at the differential side gear

Tipo ar · tema 35.30 · versione 0100 · 2016-02-12

Valido per:

Non disponibile in “it”; mostrato in Inglese.

Collocazione

Gruppo funzionale 2 Telaio › 35 Asse posteriore › 35.30 Trasmissione, comando — Serie 386 (modelli 059, 354, 364, 367, 369, 384, 387, 389) · Serie 682 (modelli 308, 318) · Serie 693 (modelli 348, 386, 396) · Serie 958 (modelli 1**)

EinPAS 17 Organi della trasmissione/assale › 17.51 Assale posteriore › 17.51.65 Ingranaggi e differenziale al ponte posteriore/trasmissione passante — Serie 386 (modelli 059, 354, 364, 367, 369, 384, 387, 389) · Serie 682 (modelli 308, 318) · Serie 693 (modelli 348, 386, 396) · Serie 958 (modelli 1**)

Valido anche per motori/cambi: 741 93*, 741 95*, 743 104, 743 106, 743 132, 743 143, 743 149, 743 153, 745 ***, 746 ***

AR35.30-B-0395-03B

Check, adjust gear backlash at the differential side gear

Through-drive

Número

Denominação

Rear axle 741.93, 743.1, 745.5, 746.890/891

BE35.30-B-1002-02A

Planetary gear axial clearance

mm

0.2...0.4

Compensation washers thickness

mm

2.35, 2.45, 2.60

Check, adjust gear backlash at the differential side gear
Check, adjust gear backlash at the differential side gear

001 589 53 21 00

Gauge

363 589 02 21 00

Dial gauge holder

Check, adjust gear backlash at the differential side gear

B35.30-0048-03

1 Place the magnetic base of gauge (2) on the upper part of differential housing (4).

2 Place the gauge probe with preliminary tension on planetary gear (1).

3 Move the planetary gear up and down, observing on gauge (2) the indication of clearance between the tooth flanks on the gears (axial clearance).

Should the clearance between tooth flanks of the gears not be according to specifications, adjust the clearance by replacing pressure disc (5). Pressure discs (5) are available with two different thicknesses, 2.35 mm or 2.60 mm