Valido per: Rear axle 746.213, 748.590 in model 934.2, 958.2/4 with code BB5 (Disc brakes on front and rear axle) Rear axle 746.218/225 in model 382.1, 634.0 Rear axle 746.305 in model 934.241, 958.4
Valido anche per motori/cambi: 746 213, 746 218, 746 225, 746 305, 748 590
AR35.20-B-0310-01TCC
Installing radial sealing ring
Rear axle
746.213, 748.590 in model 934.2, 958.2/4
with code BB5 (Disc brakes on front and rear axle)
Rear axle
746.218/225 in model 382.1, 634.0
Rear axle
746.305 in model 934.241, 958.4
Modification notes
19.07.2017
Added validity
Axles 746.305
748 589 04 15 00
Drift
748 589 00 63 00
Supplementary set
Repair materials
Number
Designation
Order number
BR00.45-Z-1017-06A
MB multipurpose grease, 400 g
A 001 989 34 51 11
1
Place the covering plate (1) in the rear wheel hub (3).
2
Clean the sealing surface of the seals (2.1 and 2.2) on the pressure ring (4).
3
Grease lightly the new inner retainer (2.1) on the outside sealing surface rubberized and install with the drift without ring up to the top on the rear wheel hub (3).
4
Install the new outer retainer (2.2) with the mandrel and with the respective ring of the complementary set on the rear wheel hub (3).
The installation depth of the outside seal (2.2) is defined by the respective ring:
W35.20-1031-01
62,5 mm ring for the rear axle 746.218/ 225, 746.305, 748.590
