ar3325b040004a

Check end play of steering knuckle and adjust if necessary

Tipo ar · tema 33.25 · versione 0103 · 2016-02-12

Valido per:

Non disponibile in “it”; mostrato in Inglese.

Collocazione

Gruppo funzionale 2 Telaio › 33 Asse anteriore › 33.25 Corpo dell'asse, fuso a snodo — Serie 688 (modelli 101, 102, 103, 111, 118, 121, 123, 133, 143, 156, 157, 158, 159, 174, 176, 177, 187, 232, 244, 254, 255, 270, 272, 276, 277)

EinPAS 17 Organi della trasmissione/assale › 17.50 Assale anteriore › 17.50.42 Fuso a snodo/mozzo della ruota/cuscinetto della ruota — Serie 688 (modelli 101, 102, 103, 111, 118, 121, 123, 133, 143, 156, 157, 158, 159, 174, 176, 177, 187, 232, 244, 254, 255, 270, 272, 276, 277)

Valido anche per motori/cambi: 732 ***, 733 ***

AR33.25-B-0400-04A

Check end play of steering knuckle and adjust if necessary

Steering knuckle

Número

Denominação

Front axle 732.510

Front axle 733.840/880, 733.882

BE33.25-B-1003-01A

Axial play and compensating washers

Beam handle

mm

0.01...0.15

0.01...0.15

Washers thickness

mm

0.5...1.6

0.7...1.9

Check end play of steering knuckle and adjust if necessary
Check end play of steering knuckle and adjust if necessary

001 589 53 21 00

Dial indicator

363 589 02 21 00

Dial gauge holder

Check end play of steering knuckle and adjust if necessary

N33.25-2003-01

1 With the dial gauge, check the axial play between the axle beam's fist and the stub.

If the maximum permissible play is exceeded, determine the compensation washer (1).

Check end play of steering knuckle and adjust if necessary

B33.25-0057-01

2 Install the corresponding compensation washer (1).

The compensation washers (1) are available in thicknessfrom 0.7 to 1.9 mm. The thickness increase of compensation washers (1) is 0.1 mm.
Axle 732.510 washers from 0.6 to 1.6 mm