AR26.60-B-0001I | Remove and install gearshift system | 12.02.16 |
Manual transmission 711.62 with Vehicle 979.0
D26.60-0017-06
1 Shift
2 Bolt
3 Lever
| Remove and install | ||
1 | Put the gearbox shifter in neutral | ||
2 | Disconnect the contact switch | ||
3 | Detach the cable shift cables at the gearbox | ||
4 | Remove the reverse light switch | ||
5 | Loosen the lever (3) | ||
6 | Remove the shift (1) | In the case of PTO fitted gearbox, pay attention in order that at shift removal the control components do not get loose. | |
Should it be necessary, loosen the shift from the sealing surface, with a few rubber hammer strikes. | |||
Installing: Chase the tapped holes for the gearbox micro-encapsulated bolts (2). Replace the bolts (2) Clean the sealing surface and apply sealing compound. Before assembly, put the shift lever in neutral, so that after the assembly, the shift can operate normally. | |||
| |||
7 | Install in reverse order | ||
8 | Check the correct operation of the gearbox shift |
Shift mechanism
Produtos para reparos
Número | Denominação | Número de pedido |
BR00.45-B-1011-01A | Sealing product - Loctite 574 | A 001 989 89 20 |