ar2660b0001g

Remove and install gearshift system

Tipo ar · tema 26.60 · versione 0101 · 2020-04-01

Valido per: Transmission 712.622/631 in model 368.0/1 Transmission 712.623 in model 368, 384 Transmission 712.625 in model 958 Transmission 712.631 in model 384.334, 685.282/284/289/290 Transmission 712.64 (except 712.647) Transmission 712.64 Transmission 712.65 Transmission 715.054/064

Non disponibile in “it”; mostrato in Inglese.

Collocazione

Gruppo funzionale 2 Telaio › 26 Cambio meccanico, presa di forza secondaria › 26.60 Comando del cambio — Serie 368 · Serie 384 · Serie 685 (modelli 282, 284, 289, 290) · Serie 958

EinPAS 17 Organi della trasmissione/assale › 17.35 Sistema di innesto/comando delle marce › 17.35.30 Modulo di comando del cambio/leva del cambio manuale/asta d'innesto/tirante di comando — Serie 368 · Serie 384 · Serie 685 (modelli 282, 284, 289, 290) · Serie 958

Valido anche per motori/cambi: 712 622, 712 623, 712 625, 712 631, 712 64*, 712 641, 712 65*, 715 054, 715 064

AR26.60-B-0001G

Remove and install gearshift system

12.03.2020

Transmission	712.622/631 in model 368.0/1
Transmission	712.623 in model 368, 384
Transmission	712.625 in model 958
Transmission	712.631 in model 384.334, 685.282/284/289/290
Transmission	712.64 (except 712.647)
Transmission	712.64
Transmission	712.65
Transmission	715.054/064

Modification notes

13.11.2006

Inclusion of model 712.62/63/64

Remove and install gearshift system

Picture corresponds to a 715.054 transmission

1	Control box screws
2	Washers
3	Control box
4	Gearbox housing
5	Cover
6	Safety screw

W26.60-1007-05

 	Remove/install
1	Remove the safety screw (6)	 Installation: Use a new safety screw.
		 .Safety bolt	*BA26.60-B-1002-01E
2	Remove the cap (5)	 Place the transmission lever in the neutral position and press it as far as it will go towards the box. Using a plastic hammer, tap the lever until the cover is released.
		 Installation: Apply a sealant to the new cover.
		Loctite 5900	*BR00.45-Z-1089-01A
3	Remove the control box (3)	 Uncouple the control box using a turn handle and apply light taps.
		 Remove the burrs produced on the control shaft by the safety screw (6).
		 Installation: Clean the sealing surfaces on the control box and the transmission (4), apply a sealant to them. .
		 .Shifter fastening bolts to transmission	*BA26.60-B-1003-01E
		Loctite 5900	*BR00.45-Z-1089-01A
4	Install in reverse order

 Command

Number	Designation		Gearbox 712.61/62/63/64/65, 715.054/062/064
BA26.60-B-1002-01E	Safety bolt	Nm	30

 Command

Number	Designation		Gearbox 712.61/62/63/64/65, 715.054/062/064
BA26.60-B-1003-01E	Shifter fastening bolts to transmission	Nm	25

Repair materials

Number	Designation	Order number
BR00.45-Z-1089-01A	Loctite 5900	A 002 989 73 20