ar2650b200202b

Install main shaft with shift rails and countershaft in rear section of transmission housing

Tipo ar · tema 26.50 · versione 0100 · 2016-02-12

Valido per:

Non disponibile in “it”; mostrato in Inglese.

Collocazione

Gruppo funzionale 2 Telaio › 26 Cambio meccanico, presa di forza secondaria › 26.50 Ruotismi, alberi, differenziale

EinPAS 17 Organi della trasmissione/assale › 17.20 Cambio › 17.20.50 Albero/ruota dentata/sincronizzazione

Valido anche per motori/cambi: 711 620, 711 622

AR26.50-B-2002-02B

Install main shaft with shift rails and countershaft in rear section of transmission housing

Install main shaft with shift rails and countershaft in rear section of transmission housing
Install main shaft with shift rails and countershaft in rear section of transmission housing

711 589 00 43 00

Compression device

711 589 03 63 00

Centering device

Produtos para reparos

Número

Denominação

Número de pedido

BR00.45-B-1002-06A

Grease according to DBL 6811.00.20 - Class 266.2

-

Install main shaft with shift rails and countershaft in rear section of transmission housing

D26.50-0115-12

1 Fit the mains shaft (8) together with the control rails (5) in the gearbox rear housing.

Pay attention to the coupling of the control rails (5) in the control rails guide (arrow).

Install main shaft with shift rails and countershaft in rear section of transmission housing

D26.50-0085-01

2 Grease the taper roller bearings.

Install main shaft with shift rails and countershaft in rear section of transmission housing

D26.50-0058-02

3 Fit the counter shaft (9) in the centering device (2).

Install main shaft with shift rails and countershaft in rear section of transmission housing

D26.50-0059-02

4 Install the pressure, until the main shaft (8) makes axial contact and remove the centering device

Pay attention during the installation process so that the control rails (5) are in the vertical position and aligned.

The counter shat must not be supported during the installation at pressure process on the bearing external ring; otherwise interrupt the installation process and guide the axle manually.

After the installation at pressure, check if the thrust washer (arrow) of the main shaft makes axial contact with the mains shaft bearing; otherwise the mains shaft axial play is changed.