ar2645b0002ta

Remove/install hydraulic pump

Tipo ar · tema 26.45 · versione 0110 · 2016-02-12

Valido per: Manual transmission 715.372, 715.504, 715.517, 715.527, 715.531, 715.567, 715.568, 715.576

Non disponibile in “it”; mostrato in Inglese.

Collocazione

Gruppo funzionale 2 Telaio › 26 Cambio meccanico, presa di forza secondaria › 26.45 Presa di forza secondaria, ingranaggio della presa di forza

EinPAS 17 Organi della trasmissione/assale › 17.45 Presa di forza › 17.45.40 Pompa dell'olio/canale dell'olio/filtro dell'olio/raffreddamento dell'olio

Valido anche per motori/cambi: 715 372, 715 504, 715 517, 715 527, 715 531, 715 567, 715 568, 715 576

AR26.45-B-0002TA

Remove/install hydraulic pump

12.02.16

Manual transmission 715.372, 715.504, 715.517, 715.527, 715.531, 715.567, 715.568, 715.576

Remove/install hydraulic pump

W26.45-1202-11

1 Hydraulic pump

2 Sealing gasket

	Remove and install
 Danger!	Risk of injury on skin and eyes from jets of high pressure hydraulic fluid. Risk of poisoning by ingestion of hydraulic fluid	Before starting a job in a hydraulic system, relieve the pressure in the system. Use protection clothes and goggles.	AS00.00-B-0013-01A
1	Detach the hydraulic pipes on the pump (1)	Catch the hydraulic oil in an appropriate container.
2	Remove the hydraulic pump (1)	Catch the oil run-off in an adequate container.
		Installing: Clean the sealing surfaces and replace the sealing gasket (2).
			*BA26.45-B-1003-01E
3	Install in reverser order
4	Check the hydraulic oil level in the reservoir, and correct if necessary	 Follow the maker's instructions for service and maintenance.
5	Fill the gearbox with oil and correct the level	Gearbox 715.372/504/517/527/531/567/568/576	AP26.00-B-2601A

PTO

Número	Denominação				Gearboxes 715.5 with CODE NB3 NA4/ 123-10c and ND3 NA4/ 124-10c	Gearboxes 715.5 with CODE NB7-9 NA4/ 123-11b/c and ND7-9 NA4/ 124-11b/c


BA26.45-B-1003-01E	Nuts attaching the hydraulic pump to the PTO			Nm	73	73

Documenti citati