1 | Lock-ring |
2 | Main shaft radial ball bearing |
3 | Hexagon socket screw |
4 | Oil deflector plate |
5 | Lock-ring |
6 | Needle roller bearing |
7 | Reverse idle gear |
8 | Counter shaft cylindric roller bearing |
W26.40-1004-12
Unmount and mount | |||
1 | Remove the transmission rear part |
| |
Transmissions 712.631/632 | |||
2 | Remove locking ring (1) | ||
3 | Remove the main shaft and the radial ball bearing (2) | Assembly: Use, compulsorily, a new radial ball bearing. | |
4 | Remove the oil deflector plate (4) | .Oil deflection plate on the rear part of the gearbox | |
5 | Remove the locking ring (5) | ||
6 | Remove the reverse gear (7) together with the needle roller bearing (6) | ||
7 | Remove the tapered roller bearing from the countershaft (8) | Assembly: Heat the bearing area in the rear part of the transmission to approximately 80°C using a thermal blower. | |
The flat face of the bearing must face the rear part of the transmission. | |||
8 | Assemble in the reverse order |