ar2640b247502a

Detaching rear part of transmission housing pulling off/pulling on device

Tipo ar · tema 26.40 · versione 0101 · 2020-06-17

Valido per: Transmission 712.622/631 in model 368.0/1 Transmission 712.623/632 in model 368, 382, 384 Transmission 712.623/632 in model 693, 694, 695 Transmission 712.631 in model 384.334

Non disponibile in “it”; mostrato in Inglese.

Collocazione

Gruppo funzionale 2 Telaio › 26 Cambio meccanico, presa di forza secondaria › 26.40 Scatola — Serie 368 · Serie 382 · Serie 384 · Serie 693 · Serie 694 · Serie 695

EinPAS 17 Organi della trasmissione/assale › 17.20 Cambio › 17.20.30 Scatola/coperchio/coppa dell'olio/sospensione — Serie 368 · Serie 382 · Serie 384 · Serie 693 · Serie 694 · Serie 695

Valido anche per motori/cambi: 712 622, 712 623, 712 631, 712 632

AR26.40-B-2475-02A

Detaching rear part of transmission housing pulling off/pulling on device

Transmission

712.622/631 in model 368.0/1

Transmission

712.623/632 in model 368, 382, 384

Transmission

712.623/632 in model 693, 694, 695

Transmission

712.631 in model 384.334

Modification notes

23.11.2006

Inclusion of the model 712.62/63

23.11.2006

Change of special tool 715 589 00 43 00 by 715 589 01 43 00

09.01.2020

Change of special tool 715 589 01 43 00 by 055 589 08 43 00. Awaiting inclusion of this new tool in NARS.

Detaching rear part of transmission housing pulling off/pulling on device
Detaching rear part of transmission housing pulling off/pulling on device

715 589 01 63 00

Mounting plate

715 589 10 63 00

Bracket

Detaching rear part of transmission housing pulling off/pulling on device

1

Secure the removal device of the transmission (1) in the areas indicated by the arrows, at the rear part (5X M10) and on the side (4X M16) via rubber buffer holder.



2

Install the countersink (2) on the spindle (3) of the removal device.



3

Tighten the spindle (3) against the main shaft using a conventional tool so that the rear transmission case (1) is ejected from the main shaft.


B26.40-0001-02