Serie
it
ar2635b100003ta
Remove/install radial shaft seal and pilot bushing for splitter group shift rod
Tipo ar · tema 26.35 · versione 0114 · 2018-11-06
Valido per: Transmission 715.358 in model 958.0/1 Transmission 715.372/382/388/527/531 in model 958.4 Transmission 715.517 in model 958.2 Transmission 715.535 in model 958.2
Non disponibile in “it”; mostrato in Inglese.
Collocazione
Gruppo funzionale 2 Telaio › 26 Cambio meccanico, presa di forza secondaria › 26.35 Gruppo Splitter — Serie 958 (modelli 0**, 1**, 2**, 4**)
EinPAS 17 Organi della trasmissione/assale › 17.20 Cambio › 17.20.30 Scatola/coperchio/coppa dell'olio/sospensione — Serie 958 (modelli 0**, 1**, 2**, 4**)
Valido anche per motori/cambi: 715 358, 715 372, 715 382, 715 388, 715 517, 715 527, 715 531, 715 535
AR26.35-B-1000-03TA
Remove/install radial shaft seal and pilot bushing for splitter group shift rod
Transmission
715.358 in model 958.0/1
Transmission
715.372/382/388/527/531 in model 958.4
Transmission
715.517 in model 958.2
Transmission
715.535 in model 958.2
Number
Designation
Order number
BR00.45-Z-1027-06A
Synthetic grease 50 g
A 001 989 32 51 10
Remove
1
Remove the guide bushing (2) with the internal puller (4), the counter support (3) and the in-house made adapter.
2
Remove the radial seal (1) with the internal puller (4), the counter support (3) and the in-house made adapter.
Install
3
Install the new radial seal (1) with the mandrel (5) up to the stop.
The sealing lip must be installed face out (piston side).
Smear synthetic grease on the radial seal (1).
4
Install the guide bushing (2) with the mandrel (5) up to the stop.
