ar2620b1024ta

Remove/install breather on gear module

Tipo ar · tema 26.20 · versione 0105 · 2016-02-12

Valido per: Manual transmission 715.3 with Vehicle 958 with CODE GE3 (Mercedes PowerShift)Manual transmission 715.5 with Vehicle 958 with CODE GE3 (Mercedes PowerShift)

Non disponibile in “it”; mostrato in Inglese.

Collocazione

Gruppo funzionale 2 Telaio › 26 Cambio meccanico, presa di forza secondaria › 26.20 Comando elettronico-pneumatico (EPS) - Comando marce (GS) — Serie 958

EinPAS 17 Organi della trasmissione/assale › 17.35 Sistema di innesto/comando delle marce › 17.35.30 Modulo di comando del cambio/leva del cambio manuale/asta d'innesto/tirante di comando — Serie 958

Valido anche per motori/cambi: 715 3**, 715 5**

AR26.20-B-1024TA

Remove/install breather on gear module

12.02.16

Manual transmission 715.3 with Vehicle 958 with CODE GE3 (Mercedes PowerShift)

Manual transmission 715.5 with Vehicle 958 with CODE GE3 (Mercedes PowerShift)

Remove/install breather on gear module

W26.20-1301-09

The picture shows gearbox 715.5

1 Sealing washer

2 Clip

3 Breather plug

4 Rubber sleeve

A92 Gears engaging electro-pneumatic unit

Remove

1

Remove the rubber sleeve (4) with the breather plug (3) and remove the clip (2) with the sealing washer (1)

2

Clean around the breather plug in the gears engaging electro-pneumatic unit (A92)

Install

3

Assemble the sealing washer (1) on the clip (2)

4

Install the clip (2) with the sealing washer (1) in the gears engaging electro-pneumatic unit (A92)

5

Assemble the breather plug (3) in the rubber sleeve (4)

6

Press the rubber sleeve (4) with the breather plug (3) until its locking with the clip (2)