ar2210d1100na

Removing and installing engine mount

Tipo ar · tema 22.10 · versione 0103 · 2006-07-25

Valido per: ENGINE 612.981 in MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD4, XD5, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7 ENGINE 647.981 in MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD4, XD5, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7 ENGINE 612.981 in MODEL 903.61 /66 /67, 904.61 /66 with CODE (ZU7) National version for Canada ENGINE 612.981 in MODEL 903.61 /66 /67, 904.61 /66 with CODE (ZU8) National version for USA ENGINE 612.981 in MODEL 903.61 /62 /66 /67, 904.61 /62 /66 with CODE (ZU9) Nation

Non disponibile in “it”; mostrato in Inglese.

Collocazione

Gruppo funzionale 1 Motore › 22 Sospensione dei gruppi › 22.10 Cuscinetto per gruppo, supporto per gruppi — Serie 647 (modelli 981) · Serie 903 (modelli 61*, 62*, 66*, 67*) · Serie 904 (modelli 61*, 62*, 66*)

EinPAS 15 Motore › 15.15 Motore a combustione interna completo/basamento motore/manovellismo › 15.15.20 Sospensione del motore — Serie 647 (modelli 981) · Serie 903 (modelli 61*, 62*, 66*, 67*) · Serie 904 (modelli 61*, 62*, 66*)

Valido anche per motori/cambi: 612 981

AR22.10-D-1100NA

Removing and installing engine mount

16.1.01

ENGINE 612.981 in MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD4, XD5, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7

ENGINE 647.981 in MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD4, XD5, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7

ENGINE 612.981 in MODEL 903.61 /66 /67, 904.61 /66 with CODE (ZU7) National version for Canada

ENGINE 612.981 in MODEL 903.61 /66 /67, 904.61 /66 with CODE (ZU8) National version for USA

ENGINE 612.981 in MODEL 903.61 /62 /66 /67, 904.61 /62 /66 with CODE (ZU9) National version for Mexico

ENGINE 647.981 in MODEL 903.61 /66 /67, 904.61 /66 with CODE (ZU7) National version for Canada

ENGINE 647.981 in MODEL 903.61 /66 /67, 904.61 /66 with CODE (ZU8) National version for USA

ENGINE 647.981 in MODEL 903.61 /62 /66 /67, 904.61 /62 /66 with CODE (ZU9) National version for Mexico

Removing and installing engine mount

D22.10-1105-08

Shown on engine 612.981

1 Nut

2 Washer

3 Stop plate

8 Screw

9 Right engine support

10 Ground cable

11 Engine lifting device

4 Engine mount

5 Left engine support

6 Bracket

7 Washer

Remove/Install

1

Remove heat shield above turbocharger

2

Raise engine

Raise engine until the engine mounts (4) no longer bear the weight of the engine.
Observe bracket (6) and ground line (10) at left engine mount (6).

AR22.10-D-1260-01NA

Installation: When lowering the engine, place the left engine support (5) and the right engine support (9) on the engine mount (4).

Insert bolts (8) and tighten by hand.

Then, lower engine fully and tighten bolts (8) to final torque.

*BA22.10-N-1002-01L

*WE58.40-Z-1007-11A

3

Unscrew nuts (1) and take off engine mount (4) together with stop plate (3)

*BA22.10-N-1001-01L

4

Install in the reverse order

Engine mounts, engine supports

Number

Designation

Engine 612.981

Engine 647.981

BA22.10-N-1001-01L

Screw for engine mount on front axle

Nm

45

45

BA22.10-N-1002-01L

Bolt of engine support to front engine mount

Nm

83

83

Workshop equipment

WE58.40-Z-1007-11A

Engine lifting fixture

Documenti citati