1 | Bolts |
2 | Bolts |
3 | Coolant connection fitting |
4 | Bolts |
5 | Coolant filler neck |
6 | Coolant pump |
7 | Bolts |
8 | Thermostat lid |
9 | Bolt |
10 | Support |
11 | Coolant thermostat |
B20.10-A001-06
| Remove/install | ||
1 | Open the engine compartment | The access to perform maintenance and repair works varies according to the manufacturer and the body type. | |
2 | Remove the acoustic encapsulation | ||
3 | Drain the coolant in the engine radiator | ||
4 | Clean the area of the coolant pump (6) and the coolant thermostat (11) | ||
5 | Remove the coolant hoses in the coolant connection fitting (3) | Catch the coolant in an appropriate container. | |
6 | Remove the coolant hoses in the coolant filler neck (5) | Catch the coolant in an appropriate container. | |
7 | Loosen the screws (1, 2) and remove the coolant connection fitting (3) | Keep the screw assembly position (1, 2). | |
Connecting fitting of coolant on the bracket | |||
Connecting fitting of coolant on the connecting box | |||
8 | Loosen the screws (4) and remove the coolant filler neck (5) in the coolant pump (6) | Keep the screw assembly position (4). | |
Intake opening of coolant on the coolant pump | |||
9 | Loosen the screws (7) and remove the thermostat lid (8) of the coolant thermostat (11). | Coolant thermostat cover | |
10 | Loosen the screw (9) and remove the support (10) in the thermostat lid (8). | When the thermostat lid (8) is replaced. | |
Intake opening bracket | |||
11 | Remove the coolant thermostat (11). | Installation: Pay attention to the correct seal fitting between the coolant thermostat (11) and the thermostat lid (8). | |
Replace the seal between the coolant thermostat (11) and the thermostat lid (8). | |||
12 | Installation in reverse order |