Gruppo funzionale 1 Motore › 14 Collettore di scarico, freno motore, impianto di depurazione gas di scarico › 14.40 Post-trattamento gas di scarico, AdBlue
EinPAS 15 Motore › 15.40 Impianto di scarico/post-trattamento dei gas di scarico › 15.40.12 Sensore/interruttore/fascio di cavi
Valido anche per motori/cambi: 457 9**, 924 9**, 926 9**
AR14.40-B-2035A
Prepare wiring harness for pump module
18.02.2020
Engine
457.9, 924.9, 926.9
except code MS5 (Euro V)
Engine
924.9, 926.9
except code MS5 (Euro V)
Engine
926.9
except code MS5 (BlueTec 5)
Pump module connection end
1
Connection contact (Ø 1.5 mm ELA)
2
Seal
3
Cable (white)
4
Cable (white/black)
5
Corrugated hose insulation
6
Plug
7
Contact socket
W14.40-1291-04
Connection end to the SCR chassis control unit outlet
3
Cable (white)
4
Cable (white/black)
5
Corrugated hose insulation
8
Seal
9
Connection contact (MCP 1.5 ELA)
W14.40-1289-01
1
Turn off ignition
2
Insert the electrical cables (3,4) into the corrugated hose insulation (5)
The new harness with the cables (3,4) should not be the one integrated in the SCR harness insulation between the pump module and the chassis control unit, it must be arranged next to it. The length of the electrical harness to be manufactured depends on the distance between the pump module and the SCR chassis control unit.
3
Install the connector on the cables (3,4) on the pump module contact
