B14.40-0114-07
1 | Connector lock | 3 | Electric connector of the level sensor | |
2 | Connectors | 4 | Level sensor |
| Remove/install | ||
Warning | Risk of burn injuries and scalding when working at AdBlue lines and the components attached to them. Risk of injury to skin and eyes when handling AdBlue. Risk of poisoning caused by swallowing AdBlue | Pour AdBlue into suitable containers only. Wait until the pressure is released before starting any work on the exhaust aftertreatment system. | |
1 | Turn off ignition | ||
Notes on use, material properties and handling of AdBlue® | . | ||
2 | Open the connector lock (1) | Press the two ends of the connector lock (1), one against the other as indicated by the arrow, until he realized that the connectors (2) are free to be removed. | |
3 | Remove the connectors (2) | ||
4 | Seal AdBlue line with clips to prevent AdBLue leakage | Clamp | |
5 | Remove the electric connector of the level sensor (3) | Turn the electric connector of the level sensor (3) counterclockwise until it is automatically released from the level sensor (4). | |
6 | Remove the level sensor (4) | Installation: Turn the level sensor (4) counterclockwise, as indicated by the arrow. | |
Installation: Pay attention that the sealing ring be correctly positioned between the level sensor (4) and the AdBlue reservoir. | |||
7 | Install in reverse order |
000 589 54 37 00
Clamp
Documenti citati
- ah1440n000101a Avvertenze sull'impiego, sulle caratteristiche e sulla manipolazione dell'AdBlue
- as1440z000101a Pericolo di ustioni e scottature dovute a liquido bollente durante i lavori sulle tubazioni AdBlue e sui componenti ad esse collegati. Pericolo di lesioni alla pelle e agli occhi durante la manipolazione di AdBlue. Pericolo di