ar1440b2009tb

Remove/install pressure filter at pump module of exhaust aftertreatment system

Tipo ar · tema 14.40 · versione 0207 · 2019-08-30

Valido per: Engine 457 in model 958.434/441/443/444/452/453/454 Engine 457.9 in model 934 Engine 457.910 in model 958.431/433/451/471/472/478 Engine 457.911 in model 695.023/053 Engine 460.984 in model 934, 938

Non disponibile in “it”; mostrato in Inglese.

Collocazione

Gruppo funzionale 1 Motore › 14 Collettore di scarico, freno motore, impianto di depurazione gas di scarico › 14.40 Post-trattamento gas di scarico, AdBlue — Serie 460 (modelli 984) · Serie 695 (modelli 023, 053) · Serie 934 · Serie 938 · Serie 958 (modelli 431, 433, 434, 441, 443, 444, 451, 452, 453, 454, 471, 472, 478)

EinPAS 15 Motore › 15.40 Impianto di scarico/post-trattamento dei gas di scarico › 15.40.51 Pompa/dosatore/ugello — Serie 460 (modelli 984) · Serie 695 (modelli 023, 053) · Serie 934 · Serie 938 · Serie 958 (modelli 431, 433, 434, 441, 443, 444, 451, 452, 453, 454, 471, 472, 478)

Valido anche per motori/cambi: 457 ***, 457 9**, 457 910, 457 911

AR14.40-B-2009TB

Remove/install pressure filter at pump module of exhaust aftertreatment system

25.08.2019

Engine

457 in model 958.434/441/443/444/452/453/454

Engine

457.9 in model 934

Engine

457.910 in model 958.431/433/451/471/472/478

Engine

457.911 in model 695.023/053

Engine

460.984 in model 934, 938

Remove/install pressure filter at pump module of exhaust aftertreatment system

W14.40-1018-08

1

AdBlue pump module

4

AdBlue feed line

7

Pressure filter housing

2

Insulation hose

5

AdBlue return line

8

Filter Element

3

AdBlue feed line connection

6

AdBlue return line connection

9

Filter cup

Warning

Risk of burn injuries and scalding when working at AdBlue lines and the components attached to them. Risk of injury to skin and eyes when handling AdBlue. Risk of poisoning caused by swallowing AdBlue

Pour AdBlue into suitable containers only. Wait until the pressure is released before starting any work on the exhaust aftertreatment system.

AS14.40-Z-0001-01A

Notes on use, material properties and handling of AdBlue®

.

AH14.40-N-0001-01A

Remove/install

1

Open the insulation hose (2) in the region of the pipe connections (3, 6) by approximately 10 cm and push back

Roller tongs

*950589013700

2

Detach the AdBlue lines (4, 5)

Clamp

*000589543700

3

Remove the filter cup (9) with filter element (8) from the pressure filter housing (7)


Use the prescribed grease, ensure that the product is used economically.
otherwise it may lead to damage of the exhaust gas post treatment system.

Before installation, apply a thin layer of grease to the sealing ring on the filter element (8) and the filter cup (9).

ABS sensor grease

*BR00.45-Z-1019-06A

Filter bowl on the pump module

*BA14.40-B-1001-02C

4

Install on the reverse order

5

Check the tightness of filter cup (9)

Exhaust gas after-treatment

Number

Designation

Engine 457.9; 460.984 except Liquid Only

BA14.40-B-1001-02C

Filter bowl on the pump module

Nm

32

Remove/install pressure filter at pump module of exhaust aftertreatment system
Remove/install pressure filter at pump module of exhaust aftertreatment system

000 589 54 37 00

Clamp

950 589 01 37 00

Roller tongs

Repair materials

Number

Designation

Order number

BR00.45-Z-1019-06A

ABS sensor grease

A 000 989 62 51 10

Documenti citati