ar1440b2009a

Remove/install pressure filter at pump module of exhaust aftertreatment system

Tipo ar · tema 14.40 · versione 0201 · 2019-11-12

Valido per: Engine 924.9 in model 368, 384.0/2, 685.282/284/289/290, 979.2 Engine 926.9 in model 368, 382.17/18, 384.0

Non disponibile in “it”; mostrato in Inglese.

Collocazione

Gruppo funzionale 1 Motore › 14 Collettore di scarico, freno motore, impianto di depurazione gas di scarico › 14.40 Post-trattamento gas di scarico, AdBlue — Serie 368 · Serie 382 (modelli 17*, 18*) · Serie 384 (modelli 0**, 2**) · Serie 685 (modelli 282, 284, 289, 290) · Serie 979 (modelli 2**)

EinPAS 15 Motore › 15.40 Impianto di scarico/post-trattamento dei gas di scarico › 15.40.51 Pompa/dosatore/ugello — Serie 368 · Serie 382 (modelli 17*, 18*) · Serie 384 (modelli 0**, 2**) · Serie 685 (modelli 282, 284, 289, 290) · Serie 979 (modelli 2**)

Valido anche per motori/cambi: 924 9**, 926 9**

AR14.40-B-2009A

Remove/install pressure filter at pump module of exhaust aftertreatment system

25.10.2019

Engine

924.9 in model 368, 384.0/2, 685.282/284/289/290, 979.2

Engine

926.9 in model 368, 382.17/18, 384.0

Remove/install pressure filter at pump module of exhaust aftertreatment system

W14.40-1018-08

1

Pump module

4

AdBlue piping (supply)

7

Pressure filter housing

2

Insulating hose

5

AdBlue pipe (return)

8

Filter Element

3

Pipe nozzle (AdBlue supply)

6

Pipe nozzle (AdBlue return)

9

Filter cup

Remove/install

Warning

Risk of burn injuries and scalding when working at AdBlue lines and the components attached to them. Risk of injury to skin and eyes when handling AdBlue. Risk of poisoning caused by swallowing AdBlue

Pour AdBlue into suitable containers only. Wait until the pressure is released before starting any work on the exhaust aftertreatment system.

AS14.40-Z-0001-01A

1

Release the AdBlue pipes clamps (4,5)

Clamp

*000589543700

Notes on use, material properties and handling of AdBlue®

AH14.40-N-0001-01A

2

Remove the filter cup (9) with filter element (8) in the pressure filter housing (7)

Installation: Clean the pressure filter housing (7) and replace the filter bowl (9) together with the filter element (8). Before installation, apply a thin layer of MB silicon grease to the sealing ring of the filter element (8) and the filter cup (9).

.Filter bowl on the pump module

*BA14.40-B-1001-02B

3

Install in reverse order

4

Check the tightness of filter cup (9)

Visual inspection.

Exhaust gas after-treatment

Number

Designation

Engine 924.9, 926.9 except Liquid Only

BA14.40-B-1001-02B

Filter bowl on the pump module

Nm

32

Remove/install pressure filter at pump module of exhaust aftertreatment system

000 589 54 37 00

Clamp

Documenti citati