ar1440b2005b

Remove/install SCR AdBlue compressed air pressure sensor

Tipo ar · tema 14.40 · versione 0200 · 2016-02-12

Valido per: Cumbustion engine 457.9 with Vehicle 382.15# #D, 634.0## #D with CODE MS5 (BlueTec 5)

Non disponibile in “it”; mostrato in Inglese.

Collocazione

Gruppo funzionale 1 Motore › 14 Collettore di scarico, freno motore, impianto di depurazione gas di scarico › 14.40 Post-trattamento gas di scarico, AdBlue — Serie 382 (modelli 15*) · Serie 634 (modelli 0**)

EinPAS 15 Motore › 15.40 Impianto di scarico/post-trattamento dei gas di scarico › 15.40.12 Sensore/interruttore/fascio di cavi — Serie 382 (modelli 15*) · Serie 634 (modelli 0**)

Valido anche per motori/cambi: 457 9**

AR14.40-B-2005B

Remove/install SCR AdBlue compressed air pressure sensor

12.02.16

Cumbustion engine 457.9 with Vehicle 382.15# #D, 634.0## #D with CODE MS5 (BlueTec 5)

Remove/install SCR AdBlue compressed air pressure sensor

B14.40-0016-08

1 Metering unit

2 O-ring

3 Electric plug

4 SCR (17B06) compressed air pressure sensor

Removing and installing

Danger!

Risk of burns and scalding while working on AdBlue pipes and components connected to them. Risk of injury on skin and eyes at contact with AdBlue. Risk of poisoning from swallowing AdBlue

Only catch AdBlue in appropriate containers. Only start working on the exhaust gas after-treatment system after relieving the pressure.

AS14.40-B-0001-01A

Indications for applications, material properties and handling AdBlue

AH14.40-B-0001-01A

1

Switch-off the ignition

2

Open the access cover

3

Disconnect the electric plug (3) from the compressed air pressure sensor (4)

4

Remove the compressed air pressure sensor (4)

*BA14.40-B-1008-02C

5

Install in reverse order

Exhaust aftertreatment

Número

Denominação

Engine 457.9 with Code MS5

BA14.40-B-1008-02C

AdBlue compressed air pressure sensor SCR on dosage unit

Nm

30

Documenti citati