ar0910p1150mcu

Remove/install air filter housing

Tipo ar · tema 09.10 · versione 0100 · 2007-09-10

Valido per: ENGINE 132.910 in MODEL 451.3 /4

Non disponibile in “it”; mostrato in Inglese.

Collocazione

Gruppo funzionale 1 Motore › 09 Aspirazione aria, sovralimentazione › 09.10 Filtro dell'aria — Serie 451 (modelli 3**, 4**)

EinPAS 15 Motore › 15.30 Aspirazione aria/sovralimentazione › 15.30.40 Filtro dell'aria/scatola del filtro dell'aria — Serie 451 (modelli 3**, 4**)

Valido anche per motori/cambi: 132 910

AR09.10-P-1150MCU

Remove/install air filter housing

21.8.07

ENGINE 132.910 in MODEL 451.3 /4

Remove/install air filter housing

P09.10-2209-11

1 Air filter housing bottom section

2 Top section of air filter housing

3 Retaining clips

4 Bolts

5 Air intake duct

Remove/install

1

Remove resonance tank

AR09.20-P-0010MCU

2

Unlock retaining clamps (3) and remove top section of air filter housing (2) from air filter housing bottom section (1)

Installation: Ensure correct

Observe seating of top section of air filter housing (2) in the mounts on the air filter housing bottom section (1).

3

Remove air filter element from air filter housing bottom section (1)

4

Remove bolts (4) for air filter housing bottom section (1) on transmission and remove together with shims

5

Unclip air filter housing bottom section (1) upwards from holder on transmission

6

Remove air intake pipe (5) on air filter housing bottom section (1)

7

Lead air filter housing bottom section (1) out of engine compartment

8

Install in the reverse order

Documenti citati