Remove/install MR/PLD control unit

AR07.15-B-1628DD

Remove/install MR/PLD control unit

03.02.2020

Engine

926.942 in model 382.171/176

Engine

926.95

1

Engine block

2

Spacer

3

Rubber shock absorbers

4

Bolt

5

Vehicle harness connector

6

Vehicle harness connector

7

Connector

8

Bolt

A6

Control unit MR/PLD

 

Remove/install

1

Turn off ignition

2

Remove tube that connects the air filter to the turbo-compressor

3

Unfasten and disconnect the vehicle wiring harness (5) at the MR/PLD (A6) control unit

 Press the retaining clip to release the vehicle wiring harness (5).

4

Unfasten and disconnect the vehicle wiring harness (6) at the MR/PLD (A6) control unit

 Unfasten the wiring harness from the engine (6) turning the locking arm.

5

Remove the MR/PLD (A6) control unit from the crankcase

 The MR/PLD (A6) control unit cannot be disassembled.

 install: Pre-assemble the spacers (2) and the rubber shock absorbers (3) with bolts (4) in the MR/PLD (A6) control unit. Pay attention to the assemblage position of the rubber shock absorbers (3).

 Engine block control unit

*BA07.15-B-1002-01A

6

Install in reverse order

 Diesel injection system with injection unit (MR/PLD)

Number

Designation

Engine 904.9, 906.9, 924.9, 926.9

BA07.15-B-1002-01A

Engine block control unit

Nm

15