Serie
it
ar0330b8401c
Remove/install guide bearing in flywheel
Tipo ar · tema 03.30 · versione 0103 · 2020-03-10
Valido per: Engine 457 in model 696.080 Engine 457.907/908/927 in model 634, 685 Engine 457.916 in model 634.011/061 Engine 457.928 in model 693.154/194/196 Engine 457.931 in model 696.090/365/367/369 Engine 457.932 in model 634.011/061/081
Non disponibile in “it”; mostrato in Inglese.
Collocazione
Gruppo funzionale 1 Motore › 03 Manovellismo › 03.30 Volano, disco conduttore, smorzatore, corona dentata di avviamento — Serie 634 · Serie 685 · Serie 693 (modelli 154, 194, 196) · Serie 696 (modelli 080, 090, 365, 367, 369)
EinPAS 15 Motore › 15.15 Motore a combustione interna completo/basamento motore/manovellismo › 15.15.41 Albero motore/volano/disco condotto — Serie 634 · Serie 685 · Serie 693 (modelli 154, 194, 196) · Serie 696 (modelli 080, 090, 365, 367, 369)
Valido anche per motori/cambi: 457 ***, 457 907, 457 908, 457 916, 457 927, 457 928, 457 931, 457 932
AR03.30-B-8401C
Remove/install guide bearing in flywheel
02.03.2020
Engine
457 in model 696.080
Engine
457.907/908/927 in model 634, 685
Engine
457.916 in model 634.011/061
Engine
457.928 in model 693.154/194/196
Engine
457.931 in model 696.090/365/367/369
Engine
457.932 in model 634.011/061/081
1
Flywheel screw
2
Roller bearing
3
Flywheel
4
Guide pins
5
External extractor
6
Counter support
7
Mandrel
L
Length of the flywheel fastening screw
Remove/install
1
Remove the clutch
AR25.10-B-0050BF
Remove/install clutchFor type 696
AR25.10-B-0050G
2
Install the engine turning and locking on the flywheel housing
Cranking device
*407589006300
3
Remove the screws (1) fastening the flywheel (3)
Installation: Check the length (L) of the flywheel fastening bolts.
.Maximum length for steering wheel screw reuse
*BE03.30-B-1011-03H
.Crankshaft flywheel
*BA03.30-B-1001-01E
4
Screw the centering mandrels (4) on two opposite threaded holes
Drift
*403589026300
5
Install the internal extractor (5) on the bearing (2)
Internal extractor
*000589273300
6
Mount the counter-support (6) on the internal extractor (5) and remove the bearing (2)
In order to avoid damage to the flywheel, place shims under the counter-support base.
Installation: Install the new bearing (2) with the aid of the mandrel (7), so that it is aligned with the support surface of the flywheel mounting bolts (arrow).
Internal extractor
*000589273300
Counter stay
*000589333300
Drift
*403589051500
7
Install in reverse order
Number
Designation
Engine 457.9, 460.9
BE03.30-B-1011-03H
Maximum length for steering wheel screw reuse
mm
74
Engine flywheel, driven plate, anti-vibration pulley, starter motor ring gear
Number
Designation
Engine 457.9; 460.984
BA03.30-B-1001-01E
Crankshaft flywheel
initial tightening
Nm
200...220
final angular tightening
graus
90...100
Documenti citati
