1 | Screw cap |
2 | Sealing ring |
3 | Filter element |
4 | Dirt collector |
5 | Housing filter |
B07.00-0002-01
B07.00-0003-01
| Remove | ||
Danger | Risk of explosion caused by fuel igniting, risk of poisoning caused by inhaling and swallowing fuel as well as risk of injury to eyes and skin caused by contactwith fuel. | No fires, sparks, open flames or smoking. Pour fuels into suitable and appropriately marked containers only. | |
1 | Open the fuel reservoir cap | To relieve excessive fuel reservoir pressure. | |
2 | Remove the threaded cap (1) from the fuel filter housing utilizing an socket wrenchSW36 | Remove the threaded cap (1) with the filtering element (3) only after draining the fuel from the fuel filter (5). | |
3 | Remove the threaded cap (1) with the filtering element (3) and exerting a lateral pressure detach the filtering element (3) | ||
4 | Lift out the dirt collector (4), by its loops, from the fuel filter (5) | Observe that the dirt retained in the collector do not get in contact with filter housing (5), do not empty the dirt collector (4) inside the filter housing (5) and under no circumstances clean it with a cloth, this could damage the fuel system. | |
5 | Clean the threaded cap (1) and the dirt collector (4) | ||
| Install | ||
6 | Replace the sealing ring (2) | Lubricate the sealing ring with a thin coating of grease. | |
7 | Install the new filtering element (3) in the threaded cap (1) | ||
8 | Install the dirt collector (4) in the filter housing (5) | Pay attention to the correct installation position. | |
Danger | Risk of explosion caused by fuel igniting, risk of poisoning caused by inhaling and swallowing fuel as well as risk of injury to eyes and skin caused by contactwith fuel. | No fires, sparks, open flames or smoking. Pour fuels into suitable and appropriately marked containers only. | |
9 | Install the threaded cap (1) with the new filtering element (3) in the filter housing (5) | Cover on the fuel filter housing | |
10 | Actuate the engine start-up and bleed the fuel system | Run engine for approximately 1 min. The system will perform the bleeding automatically. | |
11 | With the engine running, check the fuel filter tightness |
Documenti citati
- as4700z000101a Pericolo di esplosione per innesco, pericolo di intossicazione per inalazione e ingestione del carburante e pericolo di lesioni alla pelle e agli occhi per contatto con il carburante.