ap4210b4260ta
Adjust service brake and parking brake
Tipo ap · tema 42.10 · versione 0201 · 2019-07-25
Valido per: Model 958.0/1 Model 958.2/4
Non disponibile in “it”; mostrato in Inglese.
Collocazione
Gruppo funzionale 2 Telaio › 42 Freni impianto idraulico e meccanico › 42.10 Freno di servizio — Serie 958 (modelli 0**, 1**, 2**, 4**)
EinPAS 21 Freni/impianto di depressione/impianto pneumatico › 21.15 Freno di servizio/impianto di depressione › 21.15.5 Impianto frenante completo — Serie 958 (modelli 0**, 1**, 2**, 4**)
EinPAS 21 Freni/impianto di depressione/impianto pneumatico › 21.16 Freno di stazionamento › 21.16.5 Freno di stazionamento completo — Serie 958 (modelli 0**, 1**, 2**, 4**)
AP42.10-B-4260TA
| Adjust service brake and parking brake
| 24.07.2019
|
Model
| 958.0/1
|
Model
| 958.2/4
|
1
| Protect vehicle so it does not move
| Vehicle should be on a flat and leveled ground.
|
|
2
| Lift vehicle until the wheels are free and support vehicle
| Lift vehicle using front axle tube and not through axle beam center. When lifting, place a wood shim between front axle tube and jack.
|
|
3
| Turn nut (2) in the brake regulating ratchet (1) until wheel does not spin
| Brake linings will be holding brake drum.
|
|
4
| Turn nut (2) on the opposite way until wheel spins freely
| Brake linings are not supposed to scratch the brake drum.
|
|
5
| Repeat work steps 3 and 4 on all wheels
|
|
|
6
| Lower the vehicle
|
|
|
